my odroid xu3 kernel config

I needed to update the kernel on my odroid xu3 for USB3 support (I'd broken USB3 when I built the old kernel version with support for swap/ecryptfs and some lxc related features).  I found that the kernel on github still doesn't do quite what I need.  In particular, ecryptfs isn't supported out of the box (something I don't understand since it's easily built as a module so would have essentially no cost).  When I booted the github kernel it also didn't quite support unprivileged lxc.  And in fact, because of missing securityfs, even regular privileged lxc didn't work for me.

I wouldn't be surprised if I was just doing something wrong, but I'd already deleted my previous kernel so went ahead and fixed 3.10.92 instead.

Below, for my own future reference, is my config.

I expect that for future kernel versions for the xu3 there will be new configuration options enabled as users request new features.  You wouldn't, therefore, just copy this config (it's based on the base config that comes with 3.10.92  config I added for my needs.  Instead you'd meld this config with the default config for your newer kernel.

I also had to add "debug" to the Controllers line of /etc/systemd/logind.conf

Many thanks to odroid dokuwiki on building the xu3 kernel

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 3.10.92 Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_NEED_MACH_GPIO_H=y
CONFIG_NEED_MACH_MEMORY_H=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-lxc-ecryptfs"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_SPARSE_IRQ=y
CONFIG_KTIME_SCALAR=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
# CONFIG_MEMCG_KMEM is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_HOTPLUG=y
CONFIG_PANIC_TIMEOUT=0
CONFIG_EXPERT=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PADATA=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_FREEZER=y

#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_MULTIPLATFORM is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
CONFIG_ARCH_EXYNOS=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP1 is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_PLAT_SAMSUNG=y
CONFIG_PLAT_S5P=y

#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=2
# CONFIG_S5P_CLOCK is not set
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
# CONFIG_S5P_IRQ is not set
CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
CONFIG_S5P_DEV_MFC=y
CONFIG_S3C24XX_PWM=y
CONFIG_SAMSUNG_DMADEV=y

#
# Power management
#
# CONFIG_SAMSUNG_PM_DEBUG is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
CONFIG_S5P_PM=y
CONFIG_S5P_SLEEP=y
# CONFIG_SAMSUNG_CORE_TEST is not set
# CONFIG_PLAT_SPEAR is not set

#
# SAMSUNG EXYNOS SoCs Support
#
# CONFIG_ARCH_EXYNOS4 is not set
CONFIG_ARCH_EXYNOS5=y

#
# EXYNOS SoCs
#
# CONFIG_SOC_EXYNOS5250 is not set
CONFIG_SOC_EXYNOS5422=y
CONFIG_SOC_EXYNOS5422_REV_0=y
# CONFIG_SOC_EXYNOS5430 is not set
CONFIG_EXYNOS5422_BTS=y
# CONFIG_SOC_EXYNOS5440 is not set
CONFIG_EXYNOS_SNAPSHOT=y
# CONFIG_EXYNOS_SNAPSHOT_REG is not set
# CONFIG_EXYNOS_SNAPSHOT_HRTIMER is not set
# CONFIG_EXYNOS_SNAPSHOT_SOFTIRQ is not set
# CONFIG_EXYNOS_SNAPSHOT_HOOK_LOGGER is not set
CONFIG_EXYNOS_SNAPSHOT_PANIC_REBOOT=y
# CONFIG_EXYNOS_SNAPSHOT_FORCE_DUMP_MODE is not set
CONFIG_EXYNOS5_DYNAMIC_CPU_HOTPLUG=y
CONFIG_EXYNOS_CONTENT_PATH_PROTECTION=y
# CONFIG_ASV_MARGIN_TEST is not set

#
# Flattened Device Tree based board for EXYNOS SoCs
#
# CONFIG_MACH_EXYNOS5_DT is not set
# CONFIG_MACH_SMDK5422 is not set
# CONFIG_MACH_XYREF5422 is not set
CONFIG_MACH_ODROIDXU3=y
# CONFIG_MACH_XYREF5430 is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
CONFIG_ARM_TRUSTZONE=y
# CONFIG_ARM_LPAE is not set
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_KUSER_HELPERS=y
CONFIG_L2_AUTO_CLOCK_DISABLE=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_NR_BANKS=16
CONFIG_MULTI_IRQ_HANDLER=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
# CONFIG_ARM_ERRATA_742230 is not set
# CONFIG_ARM_ERRATA_742231 is not set
# CONFIG_ARM_ERRATA_643719 is not set
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_743622 is not set
# CONFIG_ARM_ERRATA_751472 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_ARM_ERRATA_761320 is not set
# CONFIG_ARM_ERRATA_766421 is not set
# CONFIG_ARM_ERRATA_773022 is not set
# CONFIG_ARM_ERRATA_774769 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_798181 is not set
# CONFIG_FIQ_DEBUGGER is not set

#
# Bus support
#
CONFIG_ARM_AMBA=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCCARD is not set

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_SMT is not set
CONFIG_DISABLE_CPU_SCHED_DOMAIN_BALANCE=y
CONFIG_SCHED_HMP=y
# CONFIG_SCHED_HMP_PRIO_FILTER is not set
CONFIG_HMP_FAST_CPU_MASK="4-7"
CONFIG_HMP_SLOW_CPU_MASK="0-3"
CONFIG_HMP_VARIABLE_SCALE=y
CONFIG_HMP_FREQUENCY_INVARIANT_SCALE=y
CONFIG_HAVE_ARM_SCU=y
# CONFIG_HAVE_ARM_ARCH_TIMER is not set
# CONFIG_MCPM is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
# CONFIG_ARM_PSCI is not set
CONFIG_LOCAL_TIMERS=y
CONFIG_ARCH_NR_GPIO=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ=200
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_XEN is not set
# CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART is not set

#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE=y
CONFIG_BUILD_ARM_APPENDED_DTB_IMAGE_NAMES="exynos5422-odroidxu3"
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
CONFIG_CMDLINE="console=ttySAC2,115200n8 vmalloc=512M"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_GENERIC_CPUFREQ_CPU0 is not set

#
# ARM CPU frequency scaling drivers
#
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
# CONFIG_ARM_EXYNOS_CPUFREQ is not set
CONFIG_ARM_EXYNOS_MP_CPUFREQ=y
# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
# CONFIG_ARM_EXYNOS5430_CPUFREQ is not set
CONFIG_ARM_EXYNOS5422_CPUFREQ=y
# CONFIG_ARM_EXYNOS5440_CPUFREQ is not set
# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_EXYNOS_CPUIDLE_C2 is not set
# CONFIG_EXYNOS_IDLE_CLOCK_DOWN is not set

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HAS_WAKELOCK=y
CONFIG_WAKELOCK=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM_RUNTIME_TEST_SYSFS=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_HAS_OPP=y
CONFIG_PM_OPP=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_RUNTIME=y
CONFIG_CPU_PM=y
# CONFIG_SUSPEND_TIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_ANDROID_PARANOID_NETWORK is not set
CONFIG_NET_ACTIVITY_STATS=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
# CONFIG_NETFILTER_XT_SET is not set

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
# CONFIG_NETFILTER_XT_MATCH_IPVS is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_REJECT_SKERR=y
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
# CONFIG_IPDDP_ENCAP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_PM=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_REGULATOR=m
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=m
CONFIG_NFC_NCI=m
CONFIG_NFC_HCI=m
# CONFIG_NFC_SHDLC is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
# CONFIG_NFC_PN544 is not set
# CONFIG_NFC_MICROREAD is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="mfc_fw.bin edid/1024x768.bin edid/1280x800.bin edid/1920x1080.bin edid/720x480.bin edid/800x600.bin edid/800x480.bin edid/1280x1024.bin edid/1280x720.bin edid/1440x900.bin edid/1680x1050.bin edid/1920x1080_50hz.bin edid/640x480.bin edid/720x576.bin"
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=256
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=16

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y

#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
CONFIG_OF_SELFTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_ATMEL_PWM is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_UID_STAT is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_MIPI_LLI is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_UFSHCD is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_MQ=m
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_MII=y
# CONFIG_IFB is not set
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=y
CONFIG_VETH=m

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
CONFIG_ETHERNET=y
# CONFIG_NET_CADENCE is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0 is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NET_VENDOR_8390 is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPPOLAC=m
CONFIG_PPPOPNS=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
# CONFIG_WLAN is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_INPUT_KEYRESET=y
CONFIG_GLOVE_TOUCH=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_SAMSUNG=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_MXT540E is not set
CONFIG_TOUCHSCREEN_DWAV_USB_MT=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYCHORD is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_GPIO is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_AMBAKMI is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_EM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_SAMSUNG=y
# CONFIG_SERIAL_SAMSUNG_DMA is not set
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_ATMEL is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
# CONFIG_HW_RANDOM_EXYNOS_SWD is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_DCC_TTY is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_CUSTOM=m
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_HAVE_S3C2410_I2C=y
CONFIG_I2C_S3C2410=y
CONFIG_HAVE_EXYNOS5_HSI2C=y
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PL022 is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_S3C64XX=m
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set

#
# Qualcomm MSM SSBI bus support
#
# CONFIG_SSBI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
# CONFIG_PINCTRL_EXYNOS5440 is not set
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_GRGPIO is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#

#
# USB GPIO expanders:
#
CONFIG_W1=m

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24160=y
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_RESET_RESTART is not set
# CONFIG_POWER_AVS is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_CPU_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_EXYNOS_THERMAL=y
# CONFIG_CPU_THERMAL_IPA is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=m
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_S2MPS11=y
# CONFIG_REGULATOR_S2MPS13 is not set
# CONFIG_REGULATOR_S5M8767 is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_ION=y
# CONFIG_VIDEO_V4L2_INT_DEVICE is not set
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not set

#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIOPLUG_CIR=m
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_USB_SN9C102=m

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_STK1160_AC97=y

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_IT913X=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_EXYNOS=y
# CONFIG_VIDEO_EXYNOS_GSCALER_1_3 is not set
# CONFIG_VIDEO_EXYNOS_GSCALER is not set
CONFIG_VIDEO_EXYNOS_MFC=y
# CONFIG_EXYNOS_MFC_V6 is not set
CONFIG_EXYNOS_MFC_V8=y
# CONFIG_VIDEO_EXYNOS_HEVC is not set
# CONFIG_VIDEO_EXYNOS_FIMC_IS is not set
# CONFIG_VIDEO_EXYNOS_SCALER is not set
# CONFIG_VIDEO_EXYNOS_FIMG2D is not set
# CONFIG_VIDEO_EXYNOS_JPEG is not set
# CONFIG_VIDEO_EXYNOS_HX_JPEG is not set
# CONFIG_VIDEO_EXYNOS_TV is not set
CONFIG_VIDEO_EXYNOS_HDMI_CEC=y
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
# CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
# CONFIG_VIDEO_SH_VEU is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
# CONFIG_RADIO_WL128X is not set
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m

#
# RDS decoders
#

#
# Video decoders
#
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#

#
# Camera sensor devices
#
CONFIG_VIDEO_MT9V011=m

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_DRM=y
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_PTN3460 is not set
CONFIG_DRM_EXYNOS=y
CONFIG_DRM_EXYNOS_IOMMU=y
CONFIG_DRM_EXYNOS_DMABUF=y
CONFIG_DRM_EXYNOS_FIMD=y
# CONFIG_DRM_EXYNOS_DPI is not set
# CONFIG_DRM_EXYNOS_DSI is not set
CONFIG_DRM_EXYNOS_DP=y
CONFIG_DRM_EXYNOS_HDMI=y
# CONFIG_DRM_EXYNOS_VIDI is not set
# CONFIG_DRM_EXYNOS_G2D is not set
# CONFIG_DRM_EXYNOS_IPP is not set
CONFIG_DRM_UDL=m
# CONFIG_DRM_ARMADA is not set
# CONFIG_DRM_TILCDC is not set

#
# ARM GPU Configuration
#
CONFIG_MALI_MIDGARD=y
# CONFIG_MALI_GATOR_SUPPORT is not set
CONFIG_MALI_MIDGARD_DVFS=y
CONFIG_MALI_MIDGARD_RT_PM=y
# CONFIG_MALI_MIDGARD_ENABLE_TRACE is not set
CONFIG_MALI_MIDGARD_DEBUG_SYS=y
CONFIG_MALI_EXPERT=y
# CONFIG_MALI_DEVFREQ is not set
# CONFIG_MALI_DEBUG_SHADER_SPLIT_FS is not set
CONFIG_MALI_PLATFORM_FAKE=y
CONFIG_MALI_PLATFORM_THIRDPARTY=y
CONFIG_MALI_PLATFORM_THIRDPARTY_NAME="5422"
# CONFIG_MALI_DEBUG is not set
# CONFIG_MALI_NO_MALI is not set
# CONFIG_MALI_TRACE_TIMELINE is not set
# CONFIG_MALI_SYSTEM_TRACE is not set
# CONFIG_MALI_GPU_TRACEPOINTS is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_ARMCLCD is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_TMIO is not set
# CONFIG_DECON_TV is not set
# CONFIG_DECON is not set
# CONFIG_FB_S3C is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=m
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_FB_SSD1307 is not set
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_FB_TFT_WATTEROTT=m
CONFIG_FB_FLEX=m
CONFIG_FB_TFT_FBTFT_DEVICE=m
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_ARM=y
# CONFIG_SND_ARMAACI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_SOC=y
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SAMSUNG_I2S=y
CONFIG_SND_SAMSUNG_AUDSS=y
# CONFIG_SND_SAMSUNG_IOMMU is not set
# CONFIG_SND_SAMSUNG_FAKEDMA is not set
# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set
# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set
# CONFIG_SND_SOC_SAMSUNG_XYREF5430_ES515 is not set
# CONFIG_SND_SOC_SAMSUNG_XYREF5422_ES515 is not set
CONFIG_SND_SOC_SAMSUNG_ODROID_MAX98090=y
# CONFIG_SND_SOC_SAMSUNG_SMDK5422_WM8994 is not set
# CONFIG_SND_SAMSUNG_SEIREN is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_MAX98090=y
CONFIG_SND_SOC_DUMMY_CODEC=y
# CONFIG_SND_SIMPLE_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LENOVO_TPKBD=m
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_PS3REMOTE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WIIMOTE_EXT=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=m

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_S5P=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_EXYNOS=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_RENESAS_USBHS is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_EXYNOS=y

#
# Debugging features
#
# CONFIG_USB_DWC3_DEBUG is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_EXYNOS_SWITCH=y
CONFIG_USB_PHY=y
# CONFIG_USB_OTG_WAKELOCK is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_OMAP_CONTROL_USB is not set
# CONFIG_OMAP_USB3 is not set
CONFIG_SAMSUNG_USBPHY=y
CONFIG_SAMSUNG_USB2PHY=y
CONFIG_SAMSUNG_USB2PHY_DUMMY=y
CONFIG_SAMSUNG_USB3PHY=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_ZERO=m
# CONFIG_USB_ZERO_HNPTEST is not set
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
# CONFIG_USB_GADGET_TARGET is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
# CONFIG_USB_G_MULTI_CDC is not set
CONFIG_USB_G_HID=m
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_G_WEBCAM=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_EMBEDDED_SDIO=y
CONFIG_MMC_PARANOID_SD_INIT=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
# CONFIG_MMC_SUPPORT_BKOPS_MODE is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_ARMMMCI is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SDHCI_PXAV3 is not set
# CONFIG_MMC_SDHCI_PXAV2 is not set
CONFIG_MMC_DW=y
CONFIG_MMC_DW_BYPASS_FMP=y
# CONFIG_MMC_DW_FMP_DM_CRYPT is not set
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_RENESAS_TPU is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_SWITCH=y
# CONFIG_SWITCH_GPIO is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set

#
# on-CPU RTC drivers
#
CONFIG_HAVE_S3C_RTC=y
# CONFIG_RTC_DRV_S3C is not set
CONFIG_RTC_DRV_SEC=y
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_SNVS is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_AMBA_PL08X is not set
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
CONFIG_PL330_DMA=y
# CONFIG_PL330TEST_LOG is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
# CONFIG_USBIP_HOST is not set
# CONFIG_USBIP_DEBUG is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
CONFIG_R8712U=m
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
# CONFIG_TRANZPORT is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16204 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
# CONFIG_ADIS16240 is not set
# CONFIG_LIS3L02DQ is not set

#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD7606 is not set
# CONFIG_AD799X is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
# CONFIG_AD7280 is not set

#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7746 is not set

#
# Direct Digital Synthesis
#
# CONFIG_AD5930 is not set
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
# CONFIG_AD9850 is not set
# CONFIG_AD9852 is not set
# CONFIG_AD9910 is not set
# CONFIG_AD9951 is not set

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16060 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16260 is not set

#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set

#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set

#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set

#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
# CONFIG_ADE7754 is not set
# CONFIG_ADE7758 is not set
# CONFIG_ADE7759 is not set
# CONFIG_ADE7854 is not set

#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set

#
# Triggers - standalone
#
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_ZSMALLOC is not set
CONFIG_USB_ENESTORAGE=m
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# CONFIG_ASHMEM is not set
# CONFIG_ANDROID_LOGGER is not set
CONFIG_ANDROID_TIMED_OUTPUT=y
# CONFIG_ANDROID_TIMED_GPIO is not set
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
# CONFIG_ANDROID_INTF_ALARM_DEV is not set
CONFIG_SYNC=y
CONFIG_SW_SYNC=y
CONFIG_SW_SYNC_USER=y
CONFIG_ION=y
# CONFIG_ION_TEST is not set
CONFIG_ION_EXYNOS=y
CONFIG_ION_EXYNOS_OF=y
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_COMMON_CLK_SI5351 is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_EXYNOS_MCT=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
CONFIG_EXYNOS_IOMMU=y
CONFIG_EXYNOS5_IOMMU=y
# CONFIG_EXYNOS7_IOMMU is not set
CONFIG_EXYNOS_IOVMM=y
CONFIG_EXYNOS_IOMMU_NO_MASTER_CLKGATE=y
# CONFIG_EXYNOS_IOMMU_DEBUG is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_SIMPLE_USAGE is not set
CONFIG_DEVFREQ_GOV_SIMPLE_EXYNOS=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set

#
# DEVFREQ Drivers
#
CONFIG_ARM_EXYNOS5422_BUS_DEVFREQ=y
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
# CONFIG_IIO_BUFFER is not set
# CONFIG_IIO_TRIGGER is not set

#
# Accelerometers
#
# CONFIG_HID_SENSOR_ACCEL_3D is not set
# CONFIG_KXSD9 is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set

#
# Analog to digital converters
#
# CONFIG_AD7266 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7887 is not set
CONFIG_EXYNOS_ADC=y
# CONFIG_MAX1363 is not set
# CONFIG_TI_ADC081C is not set

#
# Amplifiers
#
# CONFIG_AD8366 is not set

#
# Hid Sensor IIO Common
#
# CONFIG_HID_SENSOR_IIO_COMMON is not set

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD5686 is not set
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set

#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_INV_MPU6050_IIO is not set

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_VCNL4000 is not set
# CONFIG_HID_SENSOR_ALS is not set

#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_PWM=y
CONFIG_PWM_SAMSUNG=y
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_MOBICORE_DRIVER is not set

#
# ODROID Specific Hardware
#
CONFIG_ODROID_EXYNOS5_FAN=y
CONFIG_ODROID_EXYNOS5_SP=m
CONFIG_ODROID_EXYNOS5_IOBOARD=m
# CONFIG_ODROID_EXYNOS5_IOBOARD_DEBUG is not set
CONFIG_ODROID_EXYNOS5_HDMI_PHY_TUNE=y
# CONFIG_ODROID_EXYNOS5_HDMI_PHY_TUNE_DEBUG is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
CONFIG_PHY_EXYNOS_DP_VIDEO=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_EXYNOS5_USBDRD is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_AUFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CORE_NUM=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR_OTHER_CPU=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU_DELAY is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_PROBE_EVENTS is not set
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_OLD_MCOUNT=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
# CONFIG_OC_ETM is not set
# CONFIG_PID_IN_CONTEXTIDR is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_ARM=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_S5P_DEV_ACE=y
# CONFIG_ACE_USE_SSS_VER_5 is not set
CONFIG_ACE_USE_SLIMSSS_VER_1=y
# CONFIG_ACE_USE_CCI is not set
CONFIG_ACE_BC=y
CONFIG_ACE_BC_ASYNC=y
# CONFIG_ACE_BC_IRQMODE is not set
CONFIG_ACE_HASH_SHA1=y
CONFIG_ACE_HASH_SHA256=y
# CONFIG_ACE_DEBUG is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=m
# CONFIG_VIRTUALIZATION is not set
CONFIG_BACKPORT_INTEGRATE=y
CONFIG_BACKPORT_DIR="backports"
CONFIG_BACKPORT_VERSION="backports-20150222-0-g2745ccd"
CONFIG_BACKPORT_KERNEL_VERSION="next-20150222-0-g53e418f1"
CONFIG_BACKPORT_KERNEL_NAME="Linux"
CONFIG_BACKPORT_LINUX=y
CONFIG_BACKPORT_KERNEL_3_11=y
CONFIG_BACKPORT_KERNEL_3_12=y
CONFIG_BACKPORT_KERNEL_3_13=y
CONFIG_BACKPORT_KERNEL_3_14=y
CONFIG_BACKPORT_KERNEL_3_15=y
CONFIG_BACKPORT_KERNEL_3_16=y
CONFIG_BACKPORT_KERNEL_3_17=y
CONFIG_BACKPORT_KERNEL_3_18=y
CONFIG_BACKPORT_KERNEL_3_19=y
CONFIG_BACKPORT_KERNEL_3_20=y
CONFIG_BACKPORT_KERNEL_3_21=y
CONFIG_BACKPORT_KERNEL_3_22=y
CONFIG_BACKPORT_KERNEL_3_23=y
CONFIG_BACKPORT_KERNEL_3_24=y
CONFIG_BACKPORT_KERNEL_3_25=y
CONFIG_BACKPORT_KERNEL_3_26=y
CONFIG_BACKPORT_KERNEL_3_27=y
CONFIG_BACKPORT_KERNEL_3_28=y
CONFIG_BACKPORT_KERNEL_3_29=y
CONFIG_BACKPORT_KERNEL_3_30=y
CONFIG_BACKPORT_KERNEL_3_31=y
CONFIG_BACKPORT_KERNEL_3_32=y
CONFIG_BACKPORT_KERNEL_3_33=y
CONFIG_BACKPORT_KERNEL_3_34=y
CONFIG_BACKPORT_KERNEL_3_35=y
CONFIG_BACKPORT_KERNEL_3_36=y
CONFIG_BACKPORT_KERNEL_3_37=y
CONFIG_BACKPORT_KERNEL_3_38=y
CONFIG_BACKPORT_KERNEL_3_39=y
CONFIG_BACKPORT_KERNEL_3_40=y
CONFIG_BACKPORT_KERNEL_3_41=y
CONFIG_BACKPORT_KERNEL_3_42=y
CONFIG_BACKPORT_KERNEL_3_43=y
CONFIG_BACKPORT_KERNEL_3_44=y
CONFIG_BACKPORT_KERNEL_3_45=y
CONFIG_BACKPORT_KERNEL_3_46=y
CONFIG_BACKPORT_KERNEL_3_47=y
CONFIG_BACKPORT_KERNEL_3_48=y
CONFIG_BACKPORT_KERNEL_3_49=y
CONFIG_BACKPORT_KERNEL_3_50=y
CONFIG_BACKPORT_KERNEL_3_51=y
CONFIG_BACKPORT_KERNEL_3_52=y
CONFIG_BACKPORT_KERNEL_3_53=y
CONFIG_BACKPORT_KERNEL_3_54=y
CONFIG_BACKPORT_KERNEL_3_55=y
CONFIG_BACKPORT_KERNEL_3_56=y
CONFIG_BACKPORT_KERNEL_3_57=y
CONFIG_BACKPORT_KERNEL_3_58=y
CONFIG_BACKPORT_KERNEL_3_59=y
CONFIG_BACKPORT_KERNEL_3_60=y
CONFIG_BACKPORT_KERNEL_3_61=y
CONFIG_BACKPORT_KERNEL_3_62=y
CONFIG_BACKPORT_KERNEL_3_63=y
CONFIG_BACKPORT_KERNEL_3_64=y
CONFIG_BACKPORT_KERNEL_3_65=y
CONFIG_BACKPORT_KERNEL_3_66=y
CONFIG_BACKPORT_KERNEL_3_67=y
CONFIG_BACKPORT_KERNEL_3_68=y
CONFIG_BACKPORT_KERNEL_3_69=y
CONFIG_BACKPORT_KERNEL_3_70=y
CONFIG_BACKPORT_KERNEL_3_71=y
CONFIG_BACKPORT_KERNEL_3_72=y
CONFIG_BACKPORT_KERNEL_3_73=y
CONFIG_BACKPORT_KERNEL_3_74=y
CONFIG_BACKPORT_KERNEL_3_75=y
CONFIG_BACKPORT_KERNEL_3_76=y
CONFIG_BACKPORT_KERNEL_3_77=y
CONFIG_BACKPORT_KERNEL_3_78=y
CONFIG_BACKPORT_KERNEL_3_79=y
CONFIG_BACKPORT_KERNEL_3_80=y
CONFIG_BACKPORT_KERNEL_3_81=y
CONFIG_BACKPORT_KERNEL_3_82=y
CONFIG_BACKPORT_KERNEL_3_83=y
CONFIG_BACKPORT_KERNEL_3_84=y
CONFIG_BACKPORT_KERNEL_3_85=y
CONFIG_BACKPORT_KERNEL_3_86=y
CONFIG_BACKPORT_KERNEL_3_87=y
CONFIG_BACKPORT_KERNEL_3_88=y
CONFIG_BACKPORT_KERNEL_3_89=y
CONFIG_BACKPORT_KERNEL_3_90=y
CONFIG_BACKPORT_KERNEL_3_91=y
CONFIG_BACKPORT_KERNEL_3_92=y
CONFIG_BACKPORT_KERNEL_3_93=y
CONFIG_BACKPORT_KERNEL_3_94=y
CONFIG_BACKPORT_KERNEL_3_95=y
CONFIG_BACKPORT_KERNEL_3_96=y
CONFIG_BACKPORT_KERNEL_3_97=y
CONFIG_BACKPORT_KERNEL_3_98=y
CONFIG_BACKPORT_BPAUTO_BUILD_CORDIC=m
CONFIG_BACKPORT_BPAUTO_USERSEL_BUILD_ALL=y
# CONFIG_BACKPORT_BPAUTO_BUILD_CRYPTO_CCM is not set
CONFIG_BACKPORT_CFG80211=m
# CONFIG_BACKPORT_NL80211_TESTMODE is not set
# CONFIG_BACKPORT_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_BACKPORT_CFG80211_REG_DEBUG is not set
# CONFIG_BACKPORT_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_BACKPORT_CFG80211_DEFAULT_PS=y
# CONFIG_BACKPORT_CFG80211_DEBUGFS is not set
# CONFIG_BACKPORT_CFG80211_INTERNAL_REGDB is not set
# CONFIG_BACKPORT_CFG80211_WEXT is not set
# CONFIG_BACKPORT_LIB80211 is not set
CONFIG_BACKPORT_MAC80211=m
CONFIG_BACKPORT_MAC80211_HAS_RC=y
CONFIG_BACKPORT_MAC80211_RC_MINSTREL=y
CONFIG_BACKPORT_MAC80211_RC_MINSTREL_HT=y
# CONFIG_BACKPORT_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_BACKPORT_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_BACKPORT_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_BACKPORT_MAC80211_MESH is not set
CONFIG_BACKPORT_MAC80211_LEDS=y
# CONFIG_BACKPORT_MAC80211_DEBUGFS is not set
# CONFIG_BACKPORT_MAC80211_MESSAGE_TRACING is not set
# CONFIG_BACKPORT_MAC80211_DEBUG_MENU is not set
# CONFIG_BACKPORT_BT is not set
CONFIG_BACKPORT_WLAN=y
# CONFIG_BACKPORT_LIBERTAS_THINFIRM is not set
CONFIG_BACKPORT_AT76C50X_USB=m
CONFIG_BACKPORT_USB_NET_RNDIS_WLAN=m
CONFIG_BACKPORT_RTL8187=m
# CONFIG_BACKPORT_MAC80211_HWSIM is not set
CONFIG_BACKPORT_ATH_COMMON=m
CONFIG_BACKPORT_ATH_CARDS=m
# CONFIG_BACKPORT_ATH_DEBUG is not set
CONFIG_BACKPORT_ATH9K_HW=m
CONFIG_BACKPORT_ATH9K_COMMON=m
CONFIG_BACKPORT_ATH9K_BTCOEX_SUPPORT=y
CONFIG_BACKPORT_ATH9K=m
# CONFIG_BACKPORT_ATH9K_AHB is not set
# CONFIG_BACKPORT_ATH9K_DEBUGFS is not set
# CONFIG_BACKPORT_ATH9K_DYNACK is not set
# CONFIG_BACKPORT_ATH9K_WOW is not set
# CONFIG_BACKPORT_ATH9K_CHANNEL_CONTEXT is not set
CONFIG_BACKPORT_ATH9K_PCOEM=y
CONFIG_BACKPORT_ATH9K_HTC=m
# CONFIG_BACKPORT_ATH9K_HTC_DEBUGFS is not set
CONFIG_BACKPORT_CARL9170=m
CONFIG_BACKPORT_CARL9170_LEDS=y
CONFIG_BACKPORT_CARL9170_WPC=y
# CONFIG_BACKPORT_CARL9170_HWRNG is not set
CONFIG_BACKPORT_ATH6KL=m
# CONFIG_BACKPORT_ATH6KL_SDIO is not set
CONFIG_BACKPORT_ATH6KL_USB=m
# CONFIG_BACKPORT_ATH6KL_DEBUG is not set
# CONFIG_BACKPORT_ATH6KL_TRACING is not set
CONFIG_BACKPORT_AR5523=m
CONFIG_BACKPORT_ATH10K=m
# CONFIG_BACKPORT_ATH10K_DEBUG is not set
# CONFIG_BACKPORT_ATH10K_DEBUGFS is not set
# CONFIG_BACKPORT_ATH10K_TRACING is not set
CONFIG_BACKPORT_WCN36XX=m
# CONFIG_BACKPORT_WCN36XX_DEBUGFS is not set
CONFIG_BACKPORT_BRCMUTIL=m
CONFIG_BACKPORT_BRCMFMAC=m
CONFIG_BACKPORT_BRCMFMAC_PROTO_BCDC=y
# CONFIG_BACKPORT_BRCMFMAC_SDIO is not set
CONFIG_BACKPORT_BRCMFMAC_USB=y
# CONFIG_BACKPORT_LIBERTAS is not set
CONFIG_BACKPORT_P54_COMMON=m
CONFIG_BACKPORT_P54_USB=m
# CONFIG_BACKPORT_P54_SPI is not set
CONFIG_BACKPORT_RT2X00=m
CONFIG_BACKPORT_RT2500USB=m
CONFIG_BACKPORT_RT73USB=m
CONFIG_BACKPORT_RT2800USB=m
CONFIG_BACKPORT_RT2800USB_RT33XX=y
CONFIG_BACKPORT_RT2800USB_RT35XX=y
CONFIG_BACKPORT_RT2800USB_RT3573=y
CONFIG_BACKPORT_RT2800USB_RT53XX=y
CONFIG_BACKPORT_RT2800USB_RT55XX=y
CONFIG_BACKPORT_RT2800USB_UNKNOWN=y
CONFIG_BACKPORT_RT2800_LIB=m
CONFIG_BACKPORT_RT2X00_LIB_USB=m
CONFIG_BACKPORT_RT2X00_LIB=m
CONFIG_BACKPORT_RT2X00_LIB_FIRMWARE=y
CONFIG_BACKPORT_RT2X00_LIB_CRYPTO=y
CONFIG_BACKPORT_RT2X00_LIB_LEDS=y
# CONFIG_BACKPORT_RT2X00_DEBUG is not set
CONFIG_BACKPORT_RTL_CARDS=m
# CONFIG_BACKPORT_RTL8192CU is not set
CONFIG_BACKPORT_RTL8192C_COMMON=m
# CONFIG_BACKPORT_WL_TI is not set
CONFIG_BACKPORT_ZD1211RW=m
# CONFIG_BACKPORT_ZD1211RW_DEBUG is not set
# CONFIG_BACKPORT_MWIFIEX is not set
# CONFIG_BACKPORT_RSI_91X is not set
CONFIG_BACKPORT_USB_NET_DRIVERS=m
CONFIG_BACKPORT_USB_USBNET=m
CONFIG_BACKPORT_USB_NET_CDCETHER=m
# CONFIG_BACKPORT_USB_NET_CDC_NCM is not set
# CONFIG_BACKPORT_USB_NET_CDC_MBIM is not set
CONFIG_BACKPORT_USB_NET_RNDIS_HOST=m
# CONFIG_BACKPORT_USB_NET_QMI_WWAN is not set
# CONFIG_BACKPORT_USB_SIERRA_NET is not set
# CONFIG_BACKPORT_NFC is not set
# CONFIG_BACKPORT_NFC_DIGITAL is not set
# CONFIG_BACKPORT_NFC_NCI is not set
# CONFIG_BACKPORT_NFC_NCI_SPI is not set
# CONFIG_BACKPORT_NFC_HCI is not set
# CONFIG_BACKPORT_NFC_SHDLC is not set
# CONFIG_BACKPORT_6LOWPAN is not set
# CONFIG_BACKPORT_IEEE802154 is not set

#
# USB Device Class drivers
#
CONFIG_BACKPORT_USB_WDM=m
CONFIG_RTL8192CU=m
CONFIG_RTL8821AU=m
CONFIG_RTL8188EU=m
CONFIG_RTL8192DU=m

Old Ubuntu versions

I often need to install very old ubuntu versions to replicate client's environments, or at least client's old versions of databases and such.  I usually need to install these old ubuntu versions in VirtualBox.  There might be a way to get them working in lxc but it's probably not worth the trouble.

ISOs for the initial install aren't hard to find, but it can then be difficult to find packages that I need.  Fortunately, the Postgresql PGDG project has repositories for old versions of postgresql.  But for the Ubuntu install itself, I will always need at least openssh-server (and often a bunch of other things too) and the ssh server at least isn't installed by default from desktop ISOs (I should really install server ISOs more often, but I usually forget and just grab the first amd64 ISO I see).

It turns out however that there are old Ubuntu releases at http://old-releases.ubuntu.com/ubuntu/.  I'll be going there a lot.  In /etc/apt/sources.list it's sufficient to replace *.ubuntu.com with old-releases.ubuntu.com and apt-get update, apt-get upgrade and apt-get install will work as normal.

Running update-grub from chroot (e.g., recovering via livecd)

http://askubuntu.com/questions/145241/how-do-i-run-update-grub-from-a-livecd

and much the same information but a bit prettier here:

http://howtoubuntu.org/how-to-repair-restore-reinstall-grub-2-with-a-ubuntu-live-cd

Using dh_make

This was very helpful and I'm sure I'll look at it again.  It's very simple and really just for starting up and creating an initial and mostly empty .deb, but very helpful.

https://faceted.wordpress.com/2011/05/18/howto-build-a-trivial-debian-package-with-dh_make/

My SMPPSim settings

I needed to get SMPPSim to run faster.  With the default (or near default) settings, I was barely getting 2-2.5 (added up) requests per second from two kannels connected to one SMPPSim.

Setting the following settings increased my throughput to around 30-50 requests per second.  YMMV since your hardware and test setup won't be the same as mine.  Among other things I'm testing with DLRs in postgresql 8.2 in an Ubuntu gutsy VirtualBox instance.  I could probably get better performance out of a gutsy LXC instance but the Gutsy repos aren't around anymore so I can't create a gutsy instance :-).  And I'm too lazy to build 8.2 from source :-).

DECODE_PDUS_IN_LOG=false
SIMULATE_VARIABLE_SUBMIT_SM_RESPONSE_TIMES=false

I also changed this setting but mainly to silence kannel whining about TLVs it didn't recognize.  It should not affect SMPPSIM performance.
DELIVERY_RECEIPT_OPTIONAL_PARAMS=false


I wanted to speed up receiving DLRs too and the default settings were too slow (certainly the message state check frequency was far too high).  These are my DLR related settings now.

MESSAGE_STATE_CHECK_FREQUENCY=250
PERCENTAGE_THAT_TRANSITION=75
PERCENTAGE_DELIVERED=90
PERCENTAGE_ACCEPTED=2
PERCENTAGE_REJECTED=3


This is just to slightly reduce some noise due to messages being kept around in the queue even though they've really been processed completely.
DISCARD_FROM_QUEUE_AFTER=1000

I don't remember the default value for this.  I had it at 5 though, probably me not reading the bit that it's in ms :-).
DELAY_DELIVERY_RECEIPTS_BY=100

download twitch.tv livestream for watching later

http://ubuntuhandbook.org/index.php/2013/09/watch-live-streams-on-ubuntu-via-video-player/

sudo apt-get install python-pip
sudo pip install livestreamer

livestreamer twitch.tv/chess best -o output.stream

vagrant+puppet+facter fqdn fix

A fix to the occasional vagrant puppet facter problem with facter not being able to find the fqdn

I don't get this all the time (e.g., I don't need this fix on my dev machine at work), but on my home laptops I always got "default: warning: Could not retrieve fact fqdn"

A point in the link above fixes this and now I'm able to build my vagrant dev environments at home.

in the Vagrantfile, set config.vm.hostname to the fqdn.  Previously, config.vm.hostname was just the bare hostname.  I think the issue here was that at work the domains for the VMs was the same as the domain of my host.  It may, therefore, have grabbed the domain name from the host and applied that to the VMs.

At home, of course, my domain isn't the same as at the office, so the building of the fqdn from the bare hostname and host's domain didn't work.

Or that may just be a rationalization :-).  In any case, it fixed my fqdn issue.

Find matching XML/HTML/JSP tag in eclipse

Ctrl-Shift >

(that's the greater than sign).

That's very helpful.  It might break on JSPs where some tags are closed by includes, but that would be terrible style anyway, don't do that.

For matching braces, Ctrl-Shift P

list deb packages in size order

Ubuntu forums link -- list installed packages in size order

dpkg-query -W --showformat='${Installed-Size;10}\t${Package}\n' | sort -k1,1n

IFS, bash, and iterating over files with embedded spaces

Solution on stackoverflow

IFS=$'\n'

jmeter simple data writer configuration

Note to myself: for when using a simple data writer:

Minimal writer configuration.  Saves headers, URL, but not page content.

1.  Save as XML
2. Save Response Headers (XML)
3. Save Response Code
4. Save Label
5. Save Success
6. Save Time Stamp
7. Save Request Headers (XML)
8. Save Data Type
9. Save Latency
10. Save Thread Name
11. Save URL
12. Save Active Thread Counts
13. Save Idle Time
14. Save Assertion Failure Message
15. Save Assertion Results (XML)
16. Save Response Message
17. Save Sub Results (XML) [but not their content]
18. Save Elapsed Time
19. Save byte count
20. Save Sample and error counts

If the page content is needed, add "Save Sampler Data (XML)"

Limit CPU, memory, other resources available to an LXC instance

I saw this article on controlling container resources. That's very helpful, I'll be using that where previously I'd used VirtualBox (much too fat) for fine control on RAM and CPU allocated to a VM.

Show CPUs currently available to an instance:

  lxc-cgroup -n ol6ctr1 cpuset.cpus 0-7

Limit CPU time and block I/O

lxc-cgroup -n ol6ctr2 cpu.shares 256
lxc-cgroup -n ol6ctr2 blkio.weight 500

Limit RAM

lxc-cgroup -n ol6ctr2 memory.soft_limit_in_bytes 268435456
lxc-cgroup -n ol6ctr2 memory.limit_in_bytes 536870912

The settings can be made permanent by setting them in the lxc instance's config file, e.g.,

lxc.cgroup.cpuset.cpus=0,1
lxc.cgroup.memory.soft_limit_in_bytes=268435456
lxc.cgroup.memory.limit_in_bytes=536870912

The oracle article has a typo for the memory.limit_in_bytes example, it was missing the last digit (2). Fixed here.

install mint display manager on ubuntu 14.04

http://www.noobslab.com/2014/04/mdm-display-manager-and-mdm-themes-for.html

sudo add-apt-repository ppa:noobslab/mint sudo apt-get update sudo apt-get install mdm mdm-themes

Local only postfix

I often need to configure postfix to accept email but never forward it anywhere.  E.g., when configuring a backup or test instance of alfresco and I want to see email notifications being sent but I don't want that email to go to real email addresses (a common issue when restoring a production alfresco backup onto a test or dev machine).

A simple way to do all this is:

# if it's already installed.  remove it.  make sure you mean to do this. or back up your configuration

sudo apt-get purge postfix

sudo apt-get install postfix

(and tell it it's an internet server)

 edit /etc/postfix/main.cf and set

virtual_alias_maps = hash:/etc/postfix/virtual
default_transport = error:outside mail is not deliverable
unknown_local_recipient_reject_code = 450

and edit /etc/postfix/virtual, entering any necessary aliases there, e.g.,

@gmail.com tiger
bopolissimus@gmail.com bopolissimus
gerald@catalyst.net.nz gerald

generate the hash:

   postmap /etc/postfix/virtual

and restart postfix:

   sudo service postfix restart

and postfix will now accept email from localhost and forward them to the locally aliased users or to root (if no aliases match)

Because I'm paranoid, I also do the following:

   iptables -A OUTPUT -p tcp --dport 25 -d 127.0.0.1 -j ACCEPT
   iptables -A OUTPUT -p tcp --dport 25 -j DROP
   iptables -A OUTPUT -p tcp --dport 587 -j DROP
   iptables -A OUTPUT -p tcp --dport 465 -j DROP

buntangle

I often work with kannel logs and always get a severe headache when working with bearerbox logs.

I'll need this project in future, when I need to work with bearerbox logs again.

https://github.com/bopolissimus/buntangle

It reads a bearerbox log file, organizes the entries by the third field in the log file (I should read the kannel source so I'll know what that field is called, I just call it the key :-).  It then finds the PDUs in the per_key array (untangled already), and writes out the PDUs in order.

PDUs are written out with newlines before and after so they're much easier to read.

I'll also add a filter program later that will remove PDU types we don't need (generally enquire_link/enquire_link_resp, but possibly also bind_receiver* and bind_transmitter* PDUs, maybe some others).

Find and restore a single document from alfresco backup

I haven't tested this, but it looks good. Must test soon. Preferably before I need to do it against someone's production setup :-) Find and restore a single document from alfresco backup Highlights: Given the filename ${fname}

1. load the database dump into a scratch db
2. sql selects to identify which file on disk corresponds to the file you want (including which version)
3. grab the file from the backup

bandwidth limiting apt-get

I'm doing dist-upgrades to Mint Olivia from Mint-Nadia at home on a weekend. That's not such a great time since on the weekend Timmy likes to view youtube videos. And I think my sister-in-law streams tagalog movies. I could do it at night (and I did, for my first guinea pig laptop last night) but I'd rather get some of that done in the daytime too. Fortunately it's google and commandlinefu.com to the rescue. The magic command line arguments to apt-get are:

-o Acquire::http::Dl-Limit=20 -o Acquire::https::Dl-Limit=20

I could set the limit to 100 or 150 and there wouldn't be much complaint, but I'm setting it to 75 since I don't mind if it takes a while. I do have squid in front, so some of the packages will be in the cache. I'm only going to save about half the bandwidth though since two laptops are i386 and the other two are x64. Ah, but for now, I think even better is rsyncing /var/cache/apt from the other i386 machine to this one.

Ubuntu self-signed SSL cert

cd /etc/ssl/private # or wherever the certs go sudo make-ssl-cert /usr/share/ssl-cert/ssleay.cnf [hostname].crt

Creating a quantal lxc instance

For a while I tried to create a quantal lxc instance by first installing precise and then doing a distribution upgrade. After some documentation reading and reading of the lxc-ubuntu template, it turns out that's not necessary :-).

Instead, I should just:

lxc-create -t ubuntu -n quantal -- --release quantal

Next, to create a wheezy instance :-)

alfresco 4.2.x solr OverlappingFileLockException

In Alfresco 4.2.c (likely also in 4.2.b and 4.2.a), solr comes with

  alfresco.enableMultiThreadedTracking=true

 In the default setup I get:

    14:02:31,502 ERROR [org.alfresco.solr.tracker.CoreTracker] Tracking failed java.nio.channels.OverlappingFileLockException at sun.nio.ch.SharedFileLockTable.checkList(FileLockTable.java:255) at sun.nio.ch.SharedFileLockTable.add(FileLockTable.java:152) at sun.nio.ch.FileChannelImpl.tryLock(FileChannelImpl.java:1017) at java.nio.channels.FileChannel.tryLock(FileChannel.java:1154) ... 

Stopping solr and setting that false for both archive and workspace (archive|workspace)-SpacesStore/conf/solrcore.properties isn't sufficient. There will be other problems with the solr indexes.

So I just blow away the indexes and have them rebuild.

1. stop solr (and/or alfresco)
2. rm -rf archive/SpacesStore/* workspace/SpacesStore/*
3. rm -rf archive-SpacesStore/alfrescoModels workspace/SpacesStore/alfrescoModels
4. start solr (and/or alfresco).

Blowing away the models like that can lead to solr trying to index items for which the models haven't been indexed yet (leading to more solr related log entries). After everything is indexed though, those error logs should not appear anymore and solr will be stable moving forward.

Windows configurations for kerberos (supported encryption types)

Windows configurations for kerberos (supported encryption types)

Alfresco 4.2.c manager/html fix

I've had problems with Alfresco 4.2.c (bundle) because I couldn't get to the tomcat manager.

After editing tomcat-users.conf to add the manager-gui role and a user with the manager-gui role, I still couldn't get to the manager. The browser would jump straight to the Unauthorized page instead of first showing a dialog box for basic auth.

 Thanks to sujaypillai's fix it turns out that the default tomcat configuration in the bundle is broken. Sujay Pillai pointed out the solution. In tomcat/conf/context.xml, comment out the whole securePagesWithPragma valve block.

I thought setting securePagesWithPragma="true" would do the same thing, but it doesn't. Just comment it out then. Then restart, of course.

Quick fix for debian locales error

Thanks for the fix Below is as given in the link except changed country for easy copy-paste when I need this again :-).

export LANGUAGE=en_NZ.UTF-8
export LANG=en_NZ.UTF-8
export LC_ALL=en_NZ.UTF-8

locale-gen en_NZ.UTF-8
dpkg-reconfigure locales

Alfresco 4.2.c, OpenLDAP modifyTimestamp format and timezone

I had a problem with alfresco 4.2.c correctly syncing LDAP users if modifyTimestamp was of the form 20130220195623Z but not syncing them if the format was 20130221233702.687769 It turns out that a large part of the issue was just that the new format (from openLDAP in Lenny, previous was openLDAP in etch) didn't specify Zulu, so it was being interpreted as the local timezone. That's always a problem when you're 12 or 13 hours ahead of GMT (as we are in NZ). And it seems there was a separate bug so that if the timezones didn't match the modifyTimestamp code that alfresco was using was just consistently failing to compare correctly. Even if the modifyTimestamp was weeks before it didn't think it needed to do an LDAP sync. Solution was to specify the timezone offset (although numeric offsets suck since I'll still need to switch them around and restart alfresco twice a year). ldap.synchronization.personDifferentialQuery&(objectclass\=inetOrgPerson)(!(modifyTimestamp<\={0}+1300))) http://forums.alfresco.com/comment/131475#comment-131475

Multiuser pulseaudio in Mint Nadia (and maybe Ubuntu Quantal too)

I upgraded my several home computers to Mint Nadia recently and the audio stopped working the way I wanted.

I run chrome as several different users (a reasonably secure user, an insecure user and myself) and if (in the insecure or reasonably secure browser) a page had audio, I'd have to copy the URL, and paste it into firefox running as myself to hear the audio.

It turns out, Ubuntu Quantal (I'm guessing it's their fault) had changed how to do system mode in pulseaudio. To begin with, we don't even configure pulseaudio in /etc/default/pulseaudio anymore, now it's /etc/init/pulseaudio.conf.

The new way to enable system mode is:

  1. sudo vi /etc/init/pulseaudio.conf
  2. find the "#start on rulevel [2345]" line
  3. uncomment it (remove the #).
  4. restart pulseaudio.

tcpdump between apache and tomcat

I needed to monitor http traffic between apache and tomcat (apache was reverse proxying).

I usually use wireshark so I don't actually know tcpdump parameters or filter format :-).

For this very common use case though:

tcpdump -vv  -A -s 1500 -i lo 'port 8080'

sudoers for secure and insecure

I run browsers as different users.  Previously I didn't need to customize /etc/sudoers since my user had NOPASSWD:ALL.  I'm stepping away from that insecure (but convenient) practice now, so just doing

  sudo -H -u insecure chromium-browser

won't work anymore since it'll require a password, I won't type one in, and it'll fail.

Now I need to add some entries to /etc/sudoers (sudo visudo)

  tiger ALL=(secure,insecure) NOPASSWD: /usr/bin/chromium-browser

and all works again.

RALink wifi drivers

Our new laptop (an HP Pavilion G6-2119TU) has been prone to crashing once or twice a day (four times today) because the wifi driver for it is unstable.  I'm hoping that the driver from RALink is more stable. 

http://michael-peeters.blogspot.co.nz/2011/06/fixing-rt2860-wifi-chipset-under-ubuntu.html

Had to recompile from source, so posting the link here so I can find it again for when I need to rebuild the module on kernel upgrades or whenever I upgrade Mint.

multi user pulse audio

Because I run browsers as different users I need all three different users to be able to play sound and by default pulse will only allow the currently logged in user to play sound.

To let all three users play sound (usually when I click on a flash video or stream play music from Pandora) it's sufficient to edit /etc/default/pulseaudio, set  PULSEAUDIO_SYSTEM_START=1, and then restart pulse (with a logout/login or an X restart).

On Mint that port isn't accessible to the network by default.  if it is though, then add appropriate iptables rules so that network access is disabled.

Any local users will now be able to access pulse, so only do this if you trust your local users.

UPDATE:
In 2016, the way to do this is now via paprefs.  Install the paprefs package and run paprefs as the main user (i.e., I'd run it as tiger and allow localhost only access to sound).

Do this only if you trust all users on the machine.

xhost for specific local user only

On Linux (Mint, lately, but also Ubuntu and others) I run my browsers as three different users.

• When browsing sites that need high security (online banking, etc) I use the browser when logged in as myself, 
• For regular browsing of important but not financial sites (gmail, facebook, etc) I run a browser as a user named "secure" (could be any other name).  
• For likely insecure browsing (reddit, etc) I run a browser as a user named "insecure"

Previously I would have a shell script that did:

  ssh -X secure@localhost

with public key auth.  Lately I'd switched to a script that did:

  xhost +

instead so I could just

  sudo -H -u secure chromium-browser

but that's not too secure.  I finally broke down and read the xhost manual and am now doing it the right way with:

  xhost +si:localuser:secure

  xhost +si:localuser:insecure

which at least limits the xhost permission to just those two users.

Linux Mint/Mate Panel on second monitor

Not obvious. I flailed around for a bit until I found this forum post on how to move a mate panel to the second monitor.

Copying the text from that link:

1. Right-click the panel you wish to move and select “Properties”.
2. Uncheck the “Expand” option under the “General” tab.
3. Grab one of the edges of the panel by clicking on the left or right end (top or bottom end for vertical panels).
4. Drag the bar to the desired screen and position.
5. Check the “Expand” option in the “Panel Properties” window and click “Close”.

mDesktop is a winner!

As I mentioned in the preceding post on disabling windows screen flipping, I'm working on a Windows 7 machine at a client site for a few months. I've half heartedly looked for multi-workspace software for Windows. Must be free as in beer (since this isn't *my* computer and it's not important enough to get the company to pay for the software). mDesktop does a great job. I'd love to have some customization features, but it works great as-is.

Disable Windows screen flip

I'm working at a client site for a few months and they use Windows computers there. For a while I'd get confused because when I'd type Ctrl-Alt-Left or Ctrl-Alt-Right, the display would flip to portrait (with the "top" at the left or the right depending on which key combination I'd typed). It turns out this is easy to fix (well, on *this* machine, exactly where it needs to be fixed may depend on video card/driver). And the path to fix it varies too depending on version of Windows. For Windows 7 and for this Intel Q45/Q43 Express chipset: Control Panel > All ControlPanelItems > Display > Change display settings > Advanced Settings Intel(R) Graphics Media Accelerator Driver > Graphics Properties > Display Settings uncheck "Enable Rotation" > Apply and accept the change.

Auto stop torrents at 100%

#!/bin/bash

P=100

id=`transmission-remote -l | cut -c 1-11 | sed "s/\*//"  | cut -c 3- | sed "s/^ //" | grep "$P\%" | cut -f 1 -d " " `

if [ -z $id ]
then
  echo "no match : $id"
else
  sleep 60

  echo "stopping $id"
  transmission-remote -t $id -S
fi

No supported regular expression matcher error under ant

Solution is at:

http://tatwright.wordpress.com/2008/03/23/ant-troubleshooting/

sudo apt-get install ant-optional

selenium under jenkins after a firefox update

A client ran into a problem recently. After an upgrade of firefox, they suddenly had many selenium test failures. I was confused and couldn't figure it out for a *long* time.

When we'd connect to the running test (vnc), there were two tabs in the controlling firefox window. It turns out that the second tab was a "Thank you for upgrading firefox". That would have been innocuous if it just sat there in the background. Unfortunately, selenium took it over and then started to run the test in *both* tabs.

Since some tests changed session state (e.g., login, do some logged in work, logout) tests would fail when one tab would log the user in and the other tab would log the user out while the first tab wasn't finished yet.

Running firefox manually while forcing it to use the base profile used by selenium fixed the issue. We could also just have edited prefs.js and modified the lastAppVersion entry, but the first fix is easier (it does the lastAppVersion modification) and anyway I only learned about modifying lastAppVersion directly after I'd already done the first fix :-).

Binding host directories to container directories in lxc with lxc.mount.entry

I'm very happy about lxc.mount.entry in lxc containers (working in Ubuntu 11.10 Oneiric host, not tested on older hosts since I don't have any around).

e.g.,

lxc.mount.entry=/home/[user]/[some_directory] /var/lib/lxc/[container_name]/rootfs/home/[user]/[some_directory] none defaults,bind 0 0

That lets me mount a directory on the host (/var/lib/lxc/**/[some_directory]) inside the container somewhere (in this example,

/home/[user]/some_directory)

.

I'd tried something like that with samba but had instability problems so gave up. Most of the time it would work fine, but sometimes (I never had the time or inclination to figure out why) something in samba would get out of sync and I'd not be able to write new files from the LXC container, delete files, etc.

Samba does have an advantage in that the UIDs don't have to be the same since you specify which user the files will be mounted by locally. But it's easy enough to synchronize UIDs between host and container.

Low bandwidth vnc

I've been travelling and the bandwidth here isn't the best. When I need to vnc to work over the vpn I can still get pretty good performance even on slow mobile broadband:

vncviewer -depth 8 -encodings tight -compresslevel 9 [host]:[port]

debian iceweasel and jenkins seleniumhq plugin

I was having trouble getting selenium (under jenkins) to run iceweasel (on debian squeeze). selenium was whining that /usr/bin/firefox was a script. Symlinking the xulrunner stub to /usr/bin/firefox-bin didn't work since it would whine about not finding application.ini.

Thanks to Tero Tilus on running selenium under debian lenny, I find that the solution is to add /usr/lib/iceweasel to jenkins' path. That way it finds firefox-bin plus all the other files that firefox-bin needs to start.

xpath css class matching

xpath class matching when the element actually has more than one class in the class="foo bar" statement.

"The solution is arcane but I promise it works:"


//div[contains(concat(' ',normalize-space(@class),' '),' foo ')]


"Note that there must be spaces on either side of the class name 'foo'."

That's pretty long and is more general than I need. If multi-class entries are normalized already (e.g., no non-space whitespace in there, just spaces), then it's simpler to use just:


//div[contains(@class, "foo")]


That's so much shorter that I generally start with that and only fallback to the longer form if I find any entries in the html that have non-space whitespace.

whatprovides for deb

It took me long enough.

I've often wanted to learn which package installed a given file (e.g., /bin/nc or /bin/vim). It was never important enough to actually read the manual for, however :-). And my google incantations weren't quite right.

Finally I see that it's


dpkg -S [filename]


that's a lot less typing than for rpm :-).

guruplug and slow USB devices

I've got my guruplug connected to a seagate 1TB external expansion drive. At boot, the guruplug doesn't detect the seagate drive on first usb start (in the uboot process, before it even boots the linux kernel).

It's a timing issue, the drive just takes a while to start up and with the default bootcmd setup (just one usb start), the drive just isn't available yet when linux comes up.

Solution:

edit the bootcmd so that where it does the "usb start", it should next do a "usb stop;sleep 10;usb start". I thought it might be sufficient to do "sleep 10;usb start", but it isn't. The first usb start wakes up the disk. If we skip it by just doing a sleep 10, the disk still isn't detected fast enough by the succeeding usb start.

So we startup usb (usb start), stop it (usb stop) so we can start it again later, sleep a bit, and then start it. The second time we start it, it's already spun up and is available to uboot (and later, to debian).

I still had to set the passcount in /etc/fstab to zero so it wouldn't be auto-fsck'ed. This is because processing of /etc/fstab and auto-fsck happens before the USB devices are detected by the kernel. So if passcount is not zero then linux tries to check the drives to see if they should be fsck'ed but the USB drives aren't available yet and I need to Ctrl-D and type the root password for maintenance.

I might put the root filesystem on the USB drive (still thinking about it). I like the idea of having the rootfs on USB (SDCard is not an option for me since this is not the GuruPlug Server plus, no SDCard slot) since I had to install uboot, kernel and rootfs from scratch because some random power cycling corrupted the NAND and when I did an fsck on it, it corrupted it enough so that I had to unbrick it with the JTAG :-).

I've done that twice now (once here and once on the Tonido). If this (or similar) plug is going to be deployed in places where power is unstable, then having the rootfs on an external device that can be easily fscked on some other linux machine is essential.

ecryptfs and changing password

Apparently we need ecryptfs-rewrap-passphrase ~/.ecryptfs/wrapped-passphrase

or (if it's not mounted), then ecryptfs-rewrap-passphrase /home/ecrypts/[username]/.ecryptfs/wrapped-passphrase.

dos2unix in vim

http://www.xappsoftware.com/wordpress/2009/03/31/dos2unix-using-vi-or-vim/

the gist of which is:

:%s/^M//g

and to compose the ^M character you need to press 
CTRL-V -> CTRL-M

Removing Ubuntu Natty overlay scrollbars

Ahhh, I'm glad there's an easy way to disable Ubuntu Natty overlay scrollbars.

http://mikebeach.org/2011/05/disable-the-overlay-scrollbars-in-ubuntu-natty/

Globe Telecom Service -- A Quality Vacuum

I was in the Philippines for two weeks and had first hand experience of various bogosities in Globe Telecom's mobile broadband service.  I decided to test supersurf50 (avoiding supersurf220 initially in case the service was so bad that the other 4 days would be wasted if I abandoned the service).  supersurf50  provides 1 day of unlimited mobile broadband.

1. supersurf** is supposed to text you when your 24 hour subscription subscribes.  This is because, when your subscription subscribes, you switch to their default/casual mobile broadband rate of PHP 5 for 15 minutes (therefore, PHP 20/hour).  I didn't get a text the first day and the casual rate ate all but PHP 1.00 of my credit (because it only takes PHP 5.00 at a time).  I tested supersurf60 again the next day, to confirm that I still didn't receive the text.  I didn't.  This time it ate less (since I was ready for it and explicitly testing).
   
2. I called Globe support about this problem.  They asked for my number.  When I asked if they had caller ID and couldn't they just look it up, the support person said they didn't have caller ID.  I called Globe support several more times until I gave up on their phone support.  I got a different support person each time.  I asked every single support person if they had caller ID.  All of them said they didn't.  It must be true.  It's also amazing in a ridiculous and incompetent sort of way.
   
3. After they ask for your number, they ask for your name.  The second time this happened (and I think one more later support call) I asked if they had a field in their trouble ticket system for the name, so that they wouldn't have to ask it every time.  Every support person said they don't.  Must be true, no one would invent such a stupid detail, after all.  So to Globe, prepaid subscribers are just numbers that they can't even identify unless you tell them.  I could, therefore, start filing bogus problem reports using the globe mobile numbers of anyone whose number I knew (or just random numbers).
   
4. I was keeping track of when my supersurf50 would expire (so I could test, at expiration, whether it was eating my prepaid credit).  I had an alarm that would fire at expiry time.  When the alarm fired, I'd check my balance, ensure that it had been reduced by PHP 5.00 (and that, therefore, I was on the casual rate).  I'd send "supersurf status" and it would stay that I was not subcribed.  This is good since clearly I wasn't anymore.  I'd then send "supersurf50" to resubscribe, and it would say I was still subscribed.  Even an hour or two after expiry, I still couldn't resubscribe.
   
5. When I called support about this, they couldn't help.  They couldn't LOOK at my status to see if I was still subscribed or not.  It seems, they can't actually look at anything about your account or phone number.  Their only purpose is to find something in their script that's close to your problem and then read that to you.  And apologize for their inability to do anything.
   
   Twice I was referred to technical support (apparently different from "account" support.  They couldn't help me either.  They knew more technical sounding words and APN settings and such, but they couldn't look at my subscriptions either, and they couldn't even see what account support had written about my problems.  They had two completely separate (but similarly useless, because couldn't look at my true status) trouble ticket systems that didn't interoperate, so every time I was referred to technical support (only twice, to be honest), they had to ask me for my number again, my name again, and what the problem was.  again.
   
   To be fair, I only talked to technical support twice or so and I only asked one of them if she could see my "account support" tickets.  She said she couldn't and said the systems were separate.  So that's a sample of one.  It's likely true though, given the thoroughgoing incompetence of this whole system.
   
6. I had still not been told how to resubscribe to supersurf when status said I wasn't subscribed but resubscribing kept telling me I couldn't do that since I was still subscribed.  Finally, I tried "supersurf stop", and after it said I needed to send "supersurf yes" and I did that, I was finally able to resubscribe.
   
   Apparently, however, that's not in the scripts.  I talked to two or three support people about this problem and none of them suggested "supersurf stop".  Either they didn't know about the option at all, or no one had considered it as a solution, or someone had but the solution hadn't moved up to the support people yet (perhaps because Globe's response to bug reports is to apologize and then do nothing since, they can't do anything anyway.  they can't even look up status, let alone change anything).
   
   Heh, Similar bug report here from LAST YEAR.  And he couldn't resubscribe for 5 DAYS.  If the 5 days is consistent (haven't looked for more cases), it might be that there's a bug confusing "50" with "220" (perhaps "220" is assumed even if the actual subscription is "50").
   
7. I was a bit forceful in my last two account support calls.  I asked to be pushed up to the next support tier.  Apparently there is no next support tier (two support people actually said that they couldn't because there was no next level that could help me).  The best they could do was refer the issue to an issue resolution team.  I never got a call back from any such team, even after I'd made clear in my report that Globe had STOLEN several hundred pesos of prepaid credit because their text notification of subscriptions did not work as advertised.  To be fair, this was my fault too, I'd stayed up all night twice in a row for my stepfather's wake, so slept through the expiry the next morning :-(.  And I'd trusted Globe when they said they'd text me before expiry.  That's the real fault, right there.
   
   I asked to speak to a manager.  They couldn't let me do that.  I asked to have my complaint (on two occasions) referred to management with the explicit request that they listen to the recording so they could hear EXACTLY what I said (rather than just read the filtered account that the support persons were typing into their ticket system).  I never got a call or any other acknowledgement from anyone about that either (or, really, about any of my complaints about their service).  Either management listened to the recording and did nothing, or they didn't listen.  I'll attempt charity and guess the  second.
   
8. I had had enough of losing money every day to the casual rate, so I switched to supersurf220.  That would give me 5 days of unlimited broadband, reducing my casual rate losses to, perhaps 1/5th of the daily rate :-).  Unfortunately, the confirmation SMS said that the unlimited rate would expire 8 hours early (I subscribed at 23:45 or so, and it said it would expire at 15:45 or so 5 days forward).  Support couldn't help.  They could only assure me that it would actually expire at the right time.  They didn't explicitly say but left implied (presumably it's painful or against Globe policy to actually acknowledge a bug) that the notification had gotten the time wrong.
   
   As it happens, in fact the subscription did expire at the right time (23:45 that Saturday).  So either the notification was just wrong (likely, just a consistency bug similar to the "supersurf status" bug) or the complaint was pushed up to someone who could actually look at the status and they fixed the expiry time (unlikely, IMO).
   
9. At around 8:30PM one night I continuously tried to send "supersurf50".  It kept replying that it couldn't perform the subscription yet and to try again later.  There are capacity problems there, it seems.  That should be fixed.
   
   Heh, That bug has also been around for at least a year.

I had more problems with Globe service (apart from slowness and it seems they have QOS or similar rules that discriminate against UDP) but eventually I gave up calling support.  I used the broadband for 5 days since I'd already paid for it.  Quality was very unpredictable.  Most of the time it was very slow (about as slow as a dial-up modem), sometimes I'd get 128kbps, and for a whole afternoon I could stream youtube videos very fast (1.5Mbps or so).

For light surfing, facebook and chat it's sometimes worthwhile.  Next trip to the Philippines though I'm avoiding Globe.  To be fair, the support persons do seem to be very willing to help.  They just can't since they don't have the tools to help.

I tried Smart and Sun mobile broadband too.  Neither of them would let openvpn connect (I tried various combinations of reducing MTU, using TCP instead of UDP, removing TLS auth).  I'm going to have to work remotely from wired DSL connections (openvpn may be slow, but it will at least connect so I can get to the wiki and run jmeter tasks remotely via commandline).

Aaahh, tethering finally working on Globe telecom

Name: MyGlobe Inet
APN: http.globe.com.ph
MCC: 515
MNC: 02
AUTH: PAP or CHAP

Leave all other settings alone.

Globe firewalls DNS.  Only DNS requests to Globe's own servers will work.  If tethering, the default DNS server (the android handset) doesn't work.  Need to edit /etc/resolv.conf and set nameservers there.

The SetDNS app helps with that (tells you what your DHCP DNS settings are).  Google gives some other Globe DNS servers too, but they don't work.  In case the DNS server IP addresses change (they're not meant to be hardcoded anyway, being provided by DHCP instead), then setDNS is the first thing to look (there are also a bunch of other IP settings viewers on the app market, I chose SetDNS since I was testing and wanted to be able to set the DNS servers *in* android (not just the tethering laptop).

I think 2degrees must also have the same DNS firewalling behavior (I had the same issue when testing at the airport in Wellington, tethering worked, I could ping remote hosts by IP address, but I couldn't resolve DNS).

Update:

Weird situation in the morning.   I'm down to PHP 1.00 of load.  Packets go out, and even ping (tethered) works with replies arriving.  However, reply packets don't come back.  So DNS works, ping [8.8.8.8] works (including replies) but http and google talk don't work.  I *think* yahoo messenger works though.  Possibly it's TCP that's blocked but UDP is allowed through?

Ah, I just reloaded and now have unlimited broadband for the day.  I was surprised when I lost all my load leaving me with PHP 1.00.  Apparently, when the broadband plan expires, I start to get charged at PHP 5 for every 15 minutes (no auto-reload).  The lack of auto-reload is fine, but I got no notification of the expiry and so the trickle deduction of load is very surprising (and pauperizing).   Also, there's some indication that internet only works while there is at least PHP 5.00 of load.  That's just bogus.  If there's no more load, just stop providing service.  Don't set an artificial level of required load below which, for no good reason, you suddenly stop providing service.

ubuntu lxc howto

http://blog.bodhizazen.net/linux/lxc-configure-ubuntu-lucid-containers/ [Edit: 2013-05-29] Using LXC in Ubuntu is now *much* easier. Don't follow the instructions in the link above anymore, they're out of date.

Setting the guruplug to be a wifi WPA2 client

I'm going to need this link when I finally get around to setting up the guruplug :-).

Setting GuruPlug to be a Wifi client

nload finally working on tonido (sheevaplug) with debian squeeze

I've tried to get nload working on the tonido plug for a while. My tonido runs debian (I didn't want to stick with the old version of Ubuntu that comes standard, to begin with, security updates weren't being provided anymore years ago).

One thing I missed was nload. Whenever I'd try to run it I'd get a segfault.

Finally though (possibly due to a recent apt-get update;apt-get upgrade;) nload is now working without crashing. This is debian squeeze.

apache derby constraints

Apache derby's log messages on constraint violation aren't very useful. E.g.,

The check constraint 'SQL123456789012' was violated while performing an INSERT or UPDATE on table ...

To find which constraint that is:

SELECT
s1.checkdefinition
FROM
sys.syschecks s1,
sys.sysconstraints s2,
WHERE
s1.constraintid=s2.constraintid AND
s2.constraintname='SQL123456789012';

Xpath for Drupal form_build_id in jmeter

I often load test Drupal webapps with jmeter. One thing that I need to do very often is grab the form_build_id (unique for every form invocation) and use it for the form submit.

For a very simple form (only one form_build_id on the page), this works:

//input[@name="form_build_id"]/@id

in the Xpath extractor, set the reference name to whatever you want. I often set a default value of, e.g., form_build_id_no so I can easily tell (in a Debug Sampler) that no value was found and therefore the xpath isn't quite right.

The @id extracts just the id attribute from the input element.

Bloom facebook photo uploader problem -- screenshot

java web start console output is at:

http://pastebin.com/nvckgDJd

tcpdump

I much prefer wireshark because, well, I forget command line options. But today I had to run tcpdump because the server didn't have X and I would have been beaten up by our good sysadmins if I'd installed wireshark and all its dependencies (and maybe vnc) for a very short session :-).

So I read the fine manual and ended up with:

tcpdump -i eth3 -n -p -w tcp.log -c 100 -s 1024 'dst port 12345'

After which, I just scp'ed the tcp.log file and started it up in wireshark with "wireshark tcp.log".

No doubt I'll need to learn more tcpdump filter syntax when I need to do that again :-). Fortunately, that was sufficient for the immediate need.

Building a deb from installed files

I needed to create a deb of a currently installed package. I didn't have the original deb anymore but needed it so that I could use it for rolling back an upgrade in case of problems.

a google search for "create deb from installed" immediately pointed me at dpkg-repack


sudo apt-get dpkg-repack
sudo dpkg-repack


creates the deb file in the current directory. I don't know how complete that is, but it's certainly better than the nothing I had before.

Finally suspend

My Toshiba A75 laptop previously had a problem with suspend and switch-user. Before I clean-installed Maverick, the problem was likely due to confusion in configuration due to dist-upgrades.

The system was a lot cleaner and more stable after the Maverick fresh install, but there was one last niggling bug. Most of the time switch-user would work, and often suspend and restore would work, but when they'd fail they'd show "atiixp: codec reset timeout" and other dmesg errors. When switch-user or restore from suspend wouldn't work, they'd show that or another atiixp error and the laptop would then hang. I'd have to turn it off and on (I didn't try the magic sysreq keys since I'd never used them and just plain didn't know how to use them :-).

I finally got around to trying noacpi (edit /etc/defaults/grub and set GRUB_CMDLINE_LINUX=" noacpi ") and from testing tonight it looks like it's very stable. I've restored from suspend several times and switched users a lot more time.

Previously I thought it was failing because I was doing something with video or audio, so I viewed a video, switched to another user and suspended while that other user. Restore worked fine.

Over a week or two of use we'll know if noacpi is a good fix or if it working now is just a fluke :-).

Installing XPI from downloaded file

I was at a client site the other week and I was stumped. They have a locked down corporate environment and I couldn't get a newly installed firefox to download the Selenium IDE from the download site.

It was possible to get the files on another machine (that had network access), but not from firefox itself.

The weekend passed and on Monday I realized how simple the solution was. Just copy the xpi files on the other machine. Copy them to a USB drive or over the network to the locked down machine, and then load them via the file:// URL.

Tested on Linux and got that working. Didn't get to test on the actual Windows target since, in the meantime, the sysadmins gave us enough information to allow firefox to browse outward. But file:// is an easy way to install xpi files, if the browser can't get out to the world to download them directly.

Why You should be using virtualisation

Why You should be using virtualisation resonates with me since, even though I run Ubuntu (a debian based linux) and the staging and production servers are Debian, there are still compatibility issues (if only that debian packages move slowly so the Ubuntu packages are much newer than on the deployment servers).

Fortunately, since I only work on Linux servers, I can run vservers, even different versions of Debian [but using the same vserver kernel as the host]. That's a lot less memory intensive than running full virtualization environments (my preference is VirtualBox, but that's just because I haven't gotten around to testing Xen. I may test LXC on my home computers, but I'll stick with Vservers on my work dev machine since I already have a procedure for building the classes of vservers that we use at work.

libavcodec-unstripped

I have a shell script that takes jpg and videos from various cameras I've used and converts them (via ffmpeg) to standard sizes/compression ratios/formats.

Must remember though (reminded when it stopped working after a from-scratch install of Ubuntu Maverick) that I need to use libavcodec-unstripped*. Otherwise I get errors about Unknown encoder 'libxvid'

Remastering Ubuntu Live flashdrive image

I use live USB flashdrive images for installing Ubuntu because I've got old laptops and their DVD drives are sometimes flaky.

One of our laptops is also sufficiently old that the fans don't do a great job anymore. When it runs at top speed (3.3 Ghz), the laptop halts within two minutes or so because the fans can't keep the hardware cool enough and it's not smart enough to slow down the CPU. Linux also doesn't have built-in drivers for the hardware, so it can't detect that the CPU is running too hot and therefore can't dial down the cpu freq.

I needed to install Ubuntu Maverick from scratch because there were enough bogosities in the configuration (and I don't have either the time or the talent to understand it all enough to figure it all out).

This page shows how to remaster an Ubuntu 7.10 image. Fortunately, the process still works for Ubuntu 10.10.

There were more customizations I could have done (e.g., installing the omnibook module so that I'd have CPU temp monitoring available [not used by the kernel to slow down the CPU though, just informational]), and certainly I could have at least removed nano :-). But that's more easily done once the OS is running on the target. And I only have one laptop like that. If I had 3 or 5 then putting the customizations in the live flashdrive would have been worthwhile.

yahoo.com -- sucking

Yahoo.com is seriously sucking for me right now. It's not a yahoo-wide problem. It affects me and maybe some small percentage of other yahoo users.

I can log in to mail.yahoo.com. signing in to www.yahoo.com doesn't work. After the login, I get redirected back to the yahoo site but I'm still not logged in.

Pidgin can't auth to yahoo when I'm connecting from New Zealand. However, if I use a socks proxy in the Philippines, I *can* login to pidgin.

I thought maybe the email reading issue were an NZ issue. It isn't though. Via the socks proxy in the Philippines I connected to us.yahoo.com and modified my setup so that I wouldn't be auto-redirected to the NZ yahoo pages. that works when I'm connected via proxy (I see the US yahoo page). However when I browse to yahoo from NZ, I still get redirected to Xtra. That's a stupidity (although I think not on Xtra's side, it's a yahoo bogosity).

When I read my email via the socks proxy, the URL indicates that I'm going to a U.S. server, but I receive the same (well, very similar) error message:

"Sorry for the inconvenience.
You've stumbled upon an unexpected, temporary problem. Performing your action again in a few moments will likely resolve the problem completely. If not, we suggest you try re-launching Yahoo! Mail.
If the problem persists, feel free to contact Customer Care about Error Code 1.

Thanks,
The Yahoo! Mail Team".

The only difference I can see between that and the error message when I surf from new zealand (no socks proxy) is that the NZ page says "the Yahoo!Xtra Mail team".

So it's a yahoo issue, not an NZ issue.

I realized, after seeing that error often enough that gmail was pulling yahoo email and that I had changed my yahoo password recently. I changed gmail's yahoo password but yahoo is still whining. I'm guessing that yahoo got confused because there were so many bad password logins from gmail (and from a continent different from what I had told yahoo was my location). I do wonder though how that is supposed to get resolved. Will the error clear itself out eventually? Will it clear itself out before I completely give up on yahoo (abandoning friends who only know my yahoo address and whom I can't ask to change their addresses for me since, well, I can't get into my contacts list either).

*dumbasses*

Selenium RC with generated PHP tests

1. If you don't have it already, sudo apt-get install phpunit
   
2. start the selenium server (at minimum: java -jar selenium-server)
   
3. Generate the PHP testcase from the IDE.
   
4. rename the class from Example to whatever you're testing.
   
5. rename the file to be the same as the classname plus .php
   
6. In the class, add a __construct() which calls $this->setUp() and $this->start()
   
7. After the class is defined, instantiate the class and call its testcase method.
   

There may be syntax errors. The code generation is not perfect. Fix those.

disabling the firefox new addon notification

I use firefox for running selenium-RC and when it starts I want to disable the notification of new addons having been installed.

mzfuser says to: "Go to about:config, create a new boolean value "extensions.newAddons", and set it to false."

That works for me (firefox 3.6 Ubuntu).

Master qualification

"You likely probably might almost sort of maybe be best to do a test case on your hardware first, even if dummy meaningless data populated by a script, it will give you a measurement of your expected performance that is much more meaningful then my ramble above. :)"

JMeter Drupal Proxy URLS to exclude

I often use jmeter to load test drupal websites. One of the first things I need to do is capture a sample browsing session over the site using the jmeter proxy.

When I'm capturing a sample browsing session I usually don't want to grab all the embedded files since that makes for a very large set of http client requests in the thread group. At this point I want the thread group to contain just the top level URLs I actually clicked on but I want the individual entries to have "Retrieve All Embedded Resources" to be clicked.

That will increase the CPU load on the jmeter instances at runtime (they need to parse the downloaded file to extract the resources). I'm happy to make that trade for now. If it becomes a problem I'll adjust to have the embedded resources pre-extracted at proxy capture time but for most jmeter jobs I've done I haven't had to worry about test time CPU load much.

I always forget what the URL exclude patterns should look like. This is posted so I'll find it later.

Drupal sometimes adds GET parameters to URLs even for "static" resources such as css or png files. I haven't gone through to figure out which resources can have GET parameters added to them, instead, when excluding embedded/static resources I just treat them all similarly:

.*\.gif(\?.*|)
.*\.jpg(\?.*|)
.*\.png(\?.*|)
.*\.css(\?.*|)
.*\.js(\?.*|)

etc.

CTEs for clarity (no efficiency gain here)

Some messages are sent to two kannels. I've got the essential data in a postgresql table but I wanted to find the messages which were sent to both kannels (within 5 seconds of each other, most such duplicated messages are sent within the same second, or within 1 second of each other).

The query could have been done without CTEs (using subqueries) but I prefer the CTEs since they move the subqueries "out" of the select statement, making the select much easier to read.

/* set up the CTEs although they're not really common except in the sense that they're the same statement, I'm just using them as *table*expressions* :-) */
WITH lhs AS
(
select id,kannel,tstamp,dest,msg_text from decmtmo WHERE mt_mo='mt'
), rhs as
(
select id,kannel,tstamp,dest,msg_text from decmtmo WHERE mt_mo='mt'
)
SELECT lhs.id lid,rhs.id rid,abs(extract('epoch' from lhs.tstamp-rhs.tstamp)),
lhs.kannel lk, rhs.kannel rk, rhs.dest,trim(rhs.msg_text )
FROM lhs,rhs /* this is what improved, otherwise we'd have the subselects here */
WHERE lhs.id<>rhs.id /* make sure we don't look at the same row on both sides */
AND lhs.dest=rhs.dest AND lhs.msg_text=rhs.msg_text /* MT identity */
AND lhs.kannel<>rhs.kannel /* but different kannels */
AND lhs.id>rhs.id /* avoid showing two copies of the same row, with lhs and
rhs swapped */
AND 5 > abs(extract('epoch' from lhs.tstamp-rhs.tstamp))
/* within 5 seconds of each other */
ORDER by lhs.id,rhs.id

Running remote X11 program as another user and displaying locally

Running a remote X11 program and displaying it locally when the remote program needs to run as another user.

Tonido kernel with NAT (and no su to non-root user)

My "could not su to non-root user" problem with building a kernel with NAT support on the tonidoplug is solved.

On the tonido support forums (requires login, but I'm posting the link here anyway) aleinss helpfully pointed at Logging into tonido as a non root user.

Apparently, with 2.6.31 kernels and later, /proc/sys/vm/mmap_min_addr needs to be 32768 (instead of the previous 65536).

I tested it with sudo echo "32768" > /proc/sys/vm/mmap_min_addr but that didn't work. Reboot required, I guess. The solution was to edit /etc/sysctl.d/10-process-security.conf and edit the vm.mmap_min_addr line to say

vm.mmap_min_addr = 32768

Many thanks to aleinss for pointing that out.

cssh feature wishlist -- clicking on one cssh window brings all related cssh windows to the front

It might be possible to do this already (I've customized .csshrc a *little* bit, mainly just to set the default window sizes and locations), but as in the title, what I'd really like is a toggle so that when I click on one of a set of related cssh windows, all of them (including the window into which I type commands to execute on all related servers) should come to the front.

Either that or another two monitors.

Or three monitors and a computer that can support four monitors altogether :-).

php file handle GC and flock

I was confused for a bit because I had code similar to this (details elided):

function myFunc() {
  $h = fopen (MYLOCKFILE,"r");
  return flock($h, LOCK_EX);
}

And when I would call it and sleep (e.g., myFunc();sleep 300;) and then run the same program in another shell the second shell wasn't blocking at the flock call.

strace showed an flock(4, LOCK_UN) being called in the first running instance. Apparently, since I don't return the handle nor do I assign it to a variable that's passed by reference, php decides that $h can be GCed immediately upon function return. That closes the file and releases the lock, so the second instance wouldn't block since there was no lock there.

Toshiba Satellite A75 temperature control -- Maybe

I've had a problem forever with the Toshiba Satellite A75. It's got a 3.3Ghz CPU in there but I could only ever run it at one of the two lowest speeds (1.8GHz, 2.1Ghz) because any faster (even with ondemand having me run mostly at 1.8Ghz) if the CPU ever ran too long at high speeds the kernel wouldn't notice and it couldn't speed the fans up.

The whole machine is old too, so I wouldn't be surprised if the fans they're just not working too well anymore.

I just found the omnibook kernel module project though. And after

git clone, make 
sudo make install 
sudo modprobe omnibook ectype=12

It loads correctly and cat /proc/omnibook temperature says 56C. And once or twice I heard the fans spin up faster (they're on all the time these days). So I'm testing (by setting my maximum CPU speed at 3.3Ghz, but still ondemand).

If the machine is stable this way, I'll scale down to 2.4Ghz or a bit higher maybe. It'll be good to be able to do useful things at a reasonable speed again on this machine. 1.8Ghz was getting so old :-).

Transmission blocklists

I thought I'd setup some blocklists for Transmission. After some googling and looking at this and that blocklist, I decided to go full paranoid and used a whole bunch of blocklists from IBlockList.

The blocklists are gleaned from other tools (Bluetack, PeerGuardian, etc).

I don't care too much about performance (there's a warning on IBlocklist that using too many rules will affect broadband performance :-), so I decided to just install a whole bunch of (possibly redundant) lists.

To get the blocklists and install them in transmission-daemon's blocklists directory (on my machine, ~/transmission/blocklists) I use (not yet in cron, will be soon):


#!/bin/bash

cd ~/transmission/blocklists

URLS="http://list.iblocklist.com/?list=bt_level1 http://list.iblocklist.com/?list=bt_level2 http://list.iblocklist.com/?list=bt_level3 http://list.iblocklist.com/?list=bt_edu http://list.iblocklist.com/?list=bt_rangetest http://list.iblocklist.com/?list=bt_bogon http://list.iblocklist.com/?list=bt_ads http://list.iblocklist.com/?list=bt_spyware http://list.iblocklist.com/?list=bt_proxy http://list.iblocklist.com/?list=bt_templist http://list.iblocklist.com/?list=bt_microsoft http://list.iblocklist.com/?list=bt_spider http://list.iblocklist.com/?list=bt_hijacked http://list.iblocklist.com/?list=bt_dshield http://list.iblocklist.com/?list=bcoepfyewziejvcqyhqo http://list.iblocklist.com/?list=cslpybexmxyuacbyuvib http://list.iblocklist.com/?list=pwqnlynprfgtjbgqoizj http://list.iblocklist.com/?list=ijfqtofzixtwayqovmxn http://list.iblocklist.com/?list=ecqbsykllnadihkdirsh http://list.iblocklist.com/?list=jcjfaxgyyshvdbceroxf http://list.iblocklist.com/?list=lljggjrpmefcwqknpalp http://list.iblocklist.com/?list=nxs23_ipfilterx http://list.iblocklist.com/?list=soe http://list.iblocklist.com/?list=ccp"

for u in $URLS
do
wget -t 10 -c --limit-rate=128k -w 10 -nd --ignore-length -N "$u"
gzip -d *.gz
done


Unfortunately transmission-daemon doesn't notice new blocklists added while it's running, so I also have a separate script to restart transmission-daemon (not in cron yet either since I'm just playing around with this stuff for now :-). I haven't tested kill -HUP yet.

Tonidoplug kernel with NAT

I bought a Tonido plug computer and have been playing with it at home. I want it to be a dnsmasq, squid, openvpn and ssh server. It'll also do some other things, but those are the main things I'll run on it. I don't need the tonido software running there (although that may change if the people at home need to support themselves instead of me setting everything up via the command line).

I'm very happy with it since it's so much faster and easier to work with than my NSLU2 (which is 1/10th the CPU freq and 1/16th the RAM). There was one problem though, I couldn't load the NAT modules. After some investigation it turns out that the kernel doesn't have routing configured and it's missing a whole bunch of modules that Tonido (or sheeva, not clear about which exactly) decided they didn't need to provide.

Fortunately, I'm booting from a USB drive, and it's very easy to make a bootable drive. If I make a mistake and make the USB drive unbootable, I can just extract the rootfs and modules tarballs back onto the drive (before or after mkfs, according to taste) and it'll be bootable again. I would never try to modify the kernel (or even install modules) on the NAND since I don't want to risk bricking the plugcomputer. Although I did do a bunch of sudo apt-get [packages] on the NAND before I realized what I was doing and stopped :-).

Mikestaszel suggested building the module and copying it over, to get ppp working. Taking that hint, I downloaded the source for the kernel I was using and after some misadventures due to forgetting techniques from long ago, I finally got the modules I needed built and installed.

The tonido runs the 2.6.30-rc6 kernel so I downloaded 2.6.30.6 from kernel.org. I used the config file for this kernel from sheeva.with-linux.com. My first try at building the kernel didn't work because of bad magic. After some googling I realized/remembered that I needed to modify the kernel makefile so that EXTRAVERSION would match the one from the running kernel, so EXTRAVERSION=-rc6.

A second try at building the kernels got me closer but it still didn't work. The bad magic error was gone, but some symbols were missing.

I didn't particularly want to build the kernel itself since I'd hoped that just building and installing relevant modules would be sufficient. Unfortunately, NAT requires CONFIG_IP_ADVANCED_ROUTER, and that can't be built as a module. So there was no way around it, I'd have to build a kernel.

After the kernel was configured and built along with the modules I needed (make menuconfig;make;make modules), I needed to make a uImage (google pointed me at this generate uImage for sheevaplug page). That required:

sudo apt-get install uboot-mkimage
make uImage
cp arch/arm/boot/uImage /boot
make modules_install
reboot

modprobe iptable_nat finally succeeded and some testing proved that the plugcomputer was working correctly as a NAT router.

-- UPDATE --
When I installed and rebooted with the new kernel, I found myself unable to run processes as a regular user. The processed would be killed immediately. I can't see how it would have been a problem with how I built the kernel since all I did was allow advanced router features and NAT/MASQUERADE. But there it is. I don't mind running as root on the tonidoplug since everything I do there I'd need to run sudo anyway, but I've switched back to using the NSLU2 for now so I can play with the tonidoplug, building kernels, rebooting at will and possibly eventually getting this latest problem fixed :-).

-- UPDATE 2010-06-22 --
I'm wrong. I *do* mind running everything as root on the tonidoplug. I don't mind running openvpn or sshd as root, but I don't want to run squid or transmission-daemon as root since any successful remote attack instantly gets root privileges.

Orca on Ubuntu Lucid (10.04)

My brother-in-law is blind, so I've been interested in linux accessibility for a long time. Not interested (or talented) enough to actually improve accessibility, but interested enough to keep an eye on the matter.

Long ago, I couldn't get Festival or Orca to work at all on my laptops. Mainly hardware support issues. One particular problem had to do with the software requiring the audio card to allow sampling at a rate that was twice what my audio card could do.

I just tested Orca on Lucid though and it's looking very good. Just enabling Orca took all of 5 seconds. I was a little confused since some things worked (firefox and the Orca preferences) and others didn't (gedit, gnome-terminal running man). Logging out and logging back in fixed that. I suppose just enabling Orca but not restarting didn't allow Orca to get its hooks deep enough into Gnome so it could intercept X11 display and keyboard/mouse events.

It took a few retries and hour and a half to get a reasonable set of Orca flat-view keybindings that didn't conflict with the regular gnome keybindings. I like using the Windows key (Super or Super-L) as a command key for Orca since it isn't used in Linux, exists in all new keyboards and is convenient. I don't much like Orca using the Caps-Lock key for that. Using the Windows key would be a problem if Orca ran in Windows but as far as I can tell (from the Orca website it doesn't run in Windows.

I was a little confused that Orca had firefox-specific keybindings, but they probably had to implement that to have similar behavior as JAWS (the dominant windows screen reader, and therefore the dominant screen reader in the world).

So Orca has some generic keybindings for general flat-view and other functionality. It can have app-specific keybindings. And it's scriptable (says the web page, although I haven't looked at what scripts might look like or how powerful they are).tt

It's also been pretty stable (tested on three laptops, all of which are pretty old). The only instability I saw happened when trying to close the Orca program via the GUI. Gnome and X hung so completely I had to go to a terminal and kill/restart gdm.

That's no big deal though since blind people would normally *always* have Orca on. And when I killed Orca from the command line (orca -q), it died gracefully and didn't take Gnome or X with it.

But all I've done so far is play with it a bit. I haven't used it extensively at all. Instability might become a lot more noticeable after hours or days of use. Maybe I'll try to get my brother-in-law to test-drive it on one of these laptops (instead of his Windows+JAWS laptop) for a day or two.

getting the vodafone usb modem working on ubuntu

http://ip-62-105-171-197.dsl.twang.net/bvportal/forums/index.html?threadId=ff80808122654e6f01227632fff8503c&postId=ff80808122654e6f01228e6f22484bb4

tomcat thread dump at work

At work, if tomcat isn't responding, send it a kill -3 to get it to produce a thread dump.

xhost

I run three or four different browser profiles for security. There's a general browsing profile for reddit.com and links I follow from there, there's a more secure profile for gmail and facebook, and there's a most secure profile for internet banking.

Not only do I run these separate profiles, I also run them as separate users under sudo -H -u [user] [browser] [other-params].

But in order to do that I need to have an xhost setting that allows these browser profiles (running as users other than me) to display on my root display. To enable that, I have this line in ~/.xinitrc.

xhost local:

bash for loop

Oooh, I just saw Bash for loop examples.

I definitely like:

for i in {1..100}
do
...
done


I don't usually need to step forward in increments greater than 1, but for that there's


for i in {1...100..2}
do
...
done


Of course there's also


for (( c=1; c<=100; c++ )) do ... done

which is what i've used in the past, but I always forget about the double parens.

grandr on toshiba satellite karmic dual monitor setup

When I first installed a second monitor on Ubuntu Karmic, the dual monitor setup was trivial. The built-in method (System | Preferences | Display) worked very well.

Lately though (possibly due to a package upgrade) that method stopped working perfectly. It couldn't identify the external monitor model (showing it as Unknown), and when I'd select the correct resolution for it (1440x900), on gnome restart or laptop reboot, some icons on the left of the desktop would be all scrunched up together, dragging a window from the external monitor (left) to the laptop monitor (right) would have the window end up partly on the left and partly on the right. It wouldn't go all the way to the right edge of the laptop monitor. As if the virtual screen width had changed to something a *lot* shorter.

I just installed grandr and ran that. It sees better than an Unknown monitor, and the virtual screen width is back to normal. I don't know yet if this fix will survive reboots. But it probably will. And if it doesn't, well, it'll be a reasonable workaround until I upgrade to Lucid.

gnucash OFX

I started playing with gnucash a month or so ago. I ran into a bunch of problems and it turns out they're mostly due to export file format I chose.

My bank supports OFX-MS-Money, OFX-Quicken and Quicken. I saw a post that said to avoid quicken because there were issues with identifying transactions as having already been loaded (when loading the same transactions twice, either because the same export file was loaded twice, or because two export files intersect). So I avoided Quicken and OFX-Quicken.

Unfortunately OFX-MS-Money has a worse problem. For some reason, the export files produced by my bank (might be the bank's problem, might be a gnucash bug, or it might just be a bogosity in the file format, or an obscure interaction among these and other features), would load into gnucash, but for the checking account, some transactions would be lost. I doubt if the transactions were really missing, but gnucash was somehow not seeing them.

I tried the Quicken file format the other day. All transactions loaded correctly and so importing a month's worth of data was very little effort. Gnucash also asks for particular expense sources (this grocery, that pharmacy, that other restaurant, etc) to be identified as to which kind of transaction they were. That's nice since for future months, those expenses will be correctly allocated to the correct account.

Unfortunately, Quicken has a weakness in that the transaction entries were missing a lot of information. For withdrawals, for instance, OFX-MS-Money would indicate which ATM card (Sol's or mine), as well as what ATM branch the transaction was made at. The Quicken format would just have a description of WITHDRAWAL and a memo field of ATM. And it was similarly silent for a lot of other transactions.

So, while the Quicken imports very nicely and has some great usability shortcuts, I can't use it since I forget what particular transactions are about IN THE SAME WEEK, let alone a month or two later.

Fortunately the OFX-Quicken format (which gnucash calls QFX) has *most* (not all, but enough) of the information from OFX-MS-MONEY, and the accuracy of loading of the Quicken format. We don't have a *huge* number of transactions per month. It only takes 30 minutes or so to load a month's worth of transactions and correctly assign expenses to the correct account. And I don't have to walk through the checking transactions doing a binary search for missing transactions.

At some point we'll have bank accounts at other banks. When that happens I'll be able to compare accuracy of other bank OFX-MS-Money files and determine if the bug is in gnucash or in my current bank's export file :-). I'm betting on a gnucash bug, myself. But now that I've got OFX-Quicken working, I don't care enough to replicate the bug. Maybe I'll do that on the easter weekend, if we don't go anywhere.

common git branch tasks

I like

Zorch's workflow examples on starting a new branch on a remote git repository.

[Here as a reminder so I can search on site:monotrematica.blogspot.com git branch]

NZ School goes completely open source

There's a great story at CIO about how a New Zealand high school switched to open source servers going from 48 servers to 4. It's pretty good to save 11/12ths of your hardware, electricity and server maintenance/sysadmin budget.

fireEvent when keyPress, keyDown, keyUp don't work

Evil Tester writes about fireEvent, so I don't need to

I found this (and Nick Bartlett's summary) when doing a google search for selenium IDE where type, keyPress, keyDown, keyUp, etc weren't working as expected.

I'd actually found and used fireEvent a few months ago when I was working with some selenium tests for the Mahara e-portfolio open source system. But I'd since forgotten.

In the problem at hand, there was an input textbox with an onkeydown which detected what key was pressed and if it was the ascii(13), would call this.blur(). The solution was just to "fireEvent | locator | onblur".

[Posted here so that I'll be able to find it when I do a google search on "site:monotrematica.blogspot.com selenium IDE keyPress keyDown onblur" :-]

Parameterized jmeter threadgroup and loop count settings

as pointed out in the mailing list post,

run jmeter with user specified jmeter parameters, e.g.,

jmeter -J threads=10 -J loopcount=5

and then, in the threadgroup, set the relevant fields to, e.g.,

${__P(threads)} and ${__P(loopcount)}

In the beanshell sampler, parameters can also be accessed via:
JMeterUtils.getProperty("threads");

Gnome panels on external monitor

The new monitor works very well, but some things aren't great. The fact that it's a rectangle (and there is invisible space above the laptop top panel is one. But I'll adjust to that.

I did need panels on the external monitor though. It's not convenient to have tasks on both monitors over on the laptop panel since I couldn't get a panel on the external monitor.

Then I found several solutions at answers.launchpad.net.

I used the gconf-editor solution. But after reading downward, I learned about the Alt-drag trick. That works too, and is much simpler. To put a panel on the second monitor, just create it first (it'll go on the first monitor). Then press Alt and click and drag the panel to the other monitor.

Services not coming up

After a recent package update on my work computer (AMD64), services were not being started on boot (no apache, ssh, etc). Strangely enough, gdm *does* start, so I get to log in to gnome.

runlevel says "unknown" though.

A bit of googling points to this: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/497299

and also https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/461725

I don't understand the whole thing. There seems to be a race condition when init tasks run in parallel. And also bugs in updating /etc/network/interfaces.

It's fixed for me by forcing upstart to the previous version (0.6.3-10). I then pinned that. If a 0.6.3-12 version comes up I may download it and test. Or maybe I won't, since 0.6.3-10 works and I doubt if newer versions in karmic will actually give me much reason to upgrade.

[Update]
Sol's laptop (upgraded to karmic the other day) has the same problem. I'll fix it the same way tonight (can't ssh into it since the services didn't start :-).

[Update]
boy, upstart-0.6.3-11 officially sucks. I updated the toshiba laptop and had the same problem. The Durabook is fine though. That's three computers out of four. Might become four out of five after I upgrade sol's desktop at work to karmic.

Problems with 32bit java on AMD64 on karmic

I prefer to run 32 bit java on my desktop since I only have 2GB of RAM. 64bit buys me nothing, and it eats twice the RSS.

With Jaunty (and Gutsy before that) I'd followed derek's advice on building a 32bit .deb.

I ran a downloaded 32bit eclipse.

Karmic seems to have broken something (probably SWT) and 32bit eclipse with 32bit JDK isn't usable.

Posting this here so I can find Derek's article again and start with that to get 32bit eclipse and 32bit sun-jdk working together again.

[update] It looks like Miroslav Hruz has a solution to the 32bit SWT issue. I'll try that on the weekend (remotely).

[update] I got things working without really understanding (or logging) what I did. After a bunch of uninstall, reinstall, all without notes (and some of it was in synaptic, so not in .bash_history), 32-bit sun-jdk and 32-bit eclipse started working again without me needing to do anything as in the links above. I did export GDK_NATIVE_WINDOWS=1 though. Thus ends this unhelpful post :-).

No audio? Is skype running?

I was looking at newly uploaded (from camera) videos of Timmy and John and I was confused because the videos were weird:

Totem said they where *playing*, but the progress bar wasn't moving and there was neither sound nor video.


The time counter (shows how many seconds/minutes into the video/song you're in) wasn't moving.


I thought it was something wrong with the newly mangled videos (made smaller via ffmpeg) so I tried some MP3s. Same symptoms as for the videos.

So I looked around at the modules, and at dmesg. Everything looked good. Until I moved my mouse to the bottom of the screen and the hidden status panel popped up. Skype was running. Apparently, on this machine, it takes over the sound card.

Slow vim startup -- solved

I've had some frustration due to slow vim startup.

time vim -c 'q'

real 0m6.138s
user 0m0.096s
sys 0m0.024s

Found the solution though. a blog post at samdorr.net says to use -X.

So now I have two new aliases in ~/.bashrc

alias vi="/usr/bin/vi -X"
alias vim="/usr/bin/vim -X"

I was a little confused because the slowness was there in screen, but when I opened a new terminal, there was no slowness (even without the aliases). I think it's because I've restarted X since I started screen. So $DISPLAY in the screen sessions is :0.0, but possibly there's some other X authentication cookies that refer to the old X session. Ok, I just looked, there's an XDG_SESSION_COOKIE, maybe that's it, or if not, something similar. So the X authentication still succeeds, but only after a timeout.

The poster at samdorr had a different problem. His server probably didn't have X at all, or maybe vim is trying to connect via ssh X forwarding, back to his graphical terminal :-). But the solution he gives is an axe that solves my problem too since I don't need vim to talk to X at all.

Hmmm, someday I'll just need to catch up to the modern world and use gvim, and probably syntax highlighting even :-).

Vodafone "Vodem" -- very easy

A friend of mine has a vodem (that's a USB HSDPA modem that works with the Vodafone NZ network). I borrowed it and tried it out on my Jaunty (Ubuntu 9.04) laptop at home.

I was confused initially since I had no manual or anything else. My friend said that on windows there's a CD, it installs a bunch of things and then just works. I didn't think to ask if authentication via login/password was required.

After some messing around, I found a hint on ubuntuforums that pointed me in the right direction. NetworkManager in Jaunty automatically detects the modem. It even automatically detects the network. It then presents a dialog asking which country (NZ is already default selected) and which Network to use. There are three networks ("Vodafone", "Vodafone (restricted)", and "Vodafone (unrestricted)"). My confusion was that I chose the first and the modem immediately disconnected.

I should have chosen the third. Upon choosing "Vodafone (unrestricted)", the vodem connects immediately to the Vodafone network and then just works. No further management needed. This is pretty cool. Too bad vodafone data charges are still so high. When the data charges drop by a factor of 10, this will be a real player. For now, it's a nice toy that I'm soon going to return to its rightful owner.

On recruiting software developers

John Fuex has a great article, 19 Tips for Recruiting Great Developers

Now, not all companies are going to be needing the superstars this article focuses on, but the points made there should be relevant to, say, the top 85-90-95 percent of developers.

Perhaps the tips can be relaxed according to the quality of the developer needed by the company (although the company, HR division or recruiter who is conscious of the actual target percentiles [instead of being hypnotized by some mantra about hiring "only the best"], is likely very rare on the ground).

Switched back to gnome

I had switched to xfce4 in Ubuntu because it gave me some memory savings. I found, however, that on my work desktop, I got *far* more savings by installing and using a 32-bit JDK (and 32-bit eclipse to go with it).

I didn't really need to switch back to gnome, but gnome is a bit smoother than xfce in the total experience, and I found myself using gnome applets in xfce (mainly the user switcher, but some others too).

I didn't switch back to gnome immediately since I *much* preferred xfce's Alt-F2 behavior to gnome's. The application chooser is much smarter even than Gnome-do. But then I realized that I could use xfrun4 in gnome. And after testing that at work, I've switched to gnome+xfrun4 at home too.

I forgot how I was running firefox as another user for security :-). After some fumbling, I figured it out again (although, really, I should just have logged back into xfce and looked at the launcher :-).

sudo -u [other_user] -H /usr/bin/firefox-3.5 -a [profile] -P [profile]

The -H is necessary because if it's not given then it'll use your own home directory rather than the home directory of other_user.

Ubuntu 9.04 gphoto2/libgphoto2 borken for my Canon Digital Ixus 700

I use gthumb for downloading camera pictures to my computer. I have a script that takes the filenames produced by gthumb and renames and creates resized copies of the images and videos. gphoto2 talks to the camera in PTP mode.

For a while gthumb worked on my laptops. It's stopped working now though and I don't know why. There are bugs posted with Ubuntu regarding this. Adding yet another bug confirmation won't do any good.

At one point I had gphotofs working enough to mount the camera filesystem. But I didn't want to mess with the filesystem directly. And anyway, gphotofs isn't working anymore now (it runs, returns, but doesn't actually mount the filesystem, and gphotofs keeps running in the background [which is OK, that's what it needs to do as a fuse filesystem provider]).

So now I have a horrendous hack for grabbing the images :-). I installed Ubuntu Intrepid under VirtualBox, gave it access to the USB devices, and I run gthumb there. Then I just scp the files over to the host box and halt Intrepid.

Yech. It works, but is hoogly :-). Maybe this'll be fixed in Karmic.

Overall, I find Ubuntu a pretty good platform for doing everything I need to do, but there certainly are the little niggles like this that demonstrate it's not really ready for regular users. Or it is, but they'll come up against walls every once in a while, get frustrated, and go back to their windows viruses.

[Update]
Ah, pulled in gphoto2, libgphoto2 and libgphoto2-port0 from karmic (downloaded the debs manually and installed with dpkg -i) and gthumb is now downloading the pictures. I understand about lack of resources, but it does seem a bug that this fix wasn't backported to work with Jaunty.

[Update]
I'm now actually on Karmic. The dist-upgrade reverted a separate and necessary fix. Gnome has a gvfs module for gphoto2 and when it's loaded, gthumb can't read the pictures/videos from the camera since the PTP port is already in use (by the gvfs gphoto2 module). Solution is to disable that. There might be a neater way, but I just did

chmod a-rwx /usr/lib/gvfs/gvfsd-gphoto2.

Screen and scrollbars!

I work with Nigel McNie and was whining (on the company IRC server) to a friend about screen and how I wish I could get it to work with scrollbars. He pointed me at Nigel's page on how he uses screen.

I don't use urxvt, but the invocation given there works with rxvt too (just change urxvt to rxvt in the .Xdefaults entry). So now I've got scrollbars working with screen.

Slightly more secure

On my home computer I've got a reasonably secure browsing setup (firefox 3.5, noscript, adblock, flashblock, made the flash cookies directory non-writeable, etc). But nothing is perfect. So I decided to raise the bar a bit. I moved my main browsing profile to a separate user account (so that even if it gets cracked, it won't have access to my ssh keys (ssh-agent is convenient, but it could be a hole), data in my home directory (svn working copies, git working copies, random other files) or to my other privileges (sudo access on this and other computers).

My trusted profiles (online banking, power company, mobile phone company, phone/internet company, cable tv company, etc) will probably go into yet another account. I haven't done that yet. But I'll get it done tomorrow, probably.

For reference:

to allow the other user to run firefox on the main display:
xhost local:[other_user_name]

and to actually run firefox as the other user:
sudo -H -u [other_user_name] firefox-3.5 -a [profile] -P [profile]

I don't think the -a should be needed there, but it doesn't work right (loading the default profile instead of the profile I want) when it's removed. So I keep it in.

Update - I wondered why youtube and other videos had no sound in this new setup. Today I realized that it's because the browser is running as the other user, and that other user isn't in the audio group.

Fixed with vigr.